User manual LENCO XEMIO-117 BROCHURE

[. . . ] This driver is not required for Windows ME or above) a. Connect the MP3 Player to the USB port of a PC, "Find new hardware" appears on the screen, then click "Search latest driver for this device", and then click "Next". Select "Look in" to select the directory where you unzipped the driver files, and then click Yes. 1 Connecting a PC Before operation, please verify the player is powered off with one end of the USB cable came with the system inserted into PC and another end into the MP3 player. [. . . ] Notice: Never unplug the USB cable when transmitting data with PC to avoid damaging the Player. After data transmitting, please do not disconnect the player from your PC until "Device can now safely be removed" appears. While using USB function, all other buttons will be nonfunctional. In case of application lost or I/O error and power on issues caused by improper operations, please refer to the FAQ. 2 Power on/off From power off mode, press the Press the enter power off mode. mP3 standby mode button to enter the MP3 standby mode. Button 3 seconds in any mode and the player will save the data and Notice: If the player is powered off while in standby mode or while playing, all the settings will be lost!3 Main menu setup From standby or playing mode, you can press the MENU button to enter the main menu. Push the or button to select: Play music, Voice, Setting, Intro, About, Folder and Exit; you can press the MENU button to enter the desired submenu. 1Playing music a) From MP3 standby mode, you can press the button a third time. Button to play MP3 music and press the button again to pause. 7 Language Setup Push the or button to select from the following languages:German, English, French, Spanish, Poland, Danish, Portuguese, Italian, Dutch, Finnish, and Swedish. 4 Intro From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the or button to select the intro function, and then button to exit. During intro, it will play the initial 10 seconds of each music file and then skip to the next file. 5 About From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the available. Button to select the about function, and then Press the MENU button to view the total memory capacity and the memory currently 6 Folder function From or voice standby mode, you can press the MENU button to enter the main menu, and push the or button to select the folder function, and then press the or to MENU button to confirm. You can push and hold the MENU button to browse the file, and push the select the desired one. Press the MENU button again, you can play or delete music. Note: You can not view the record folder and recorded files while in play music mode, this is only possible in play voice mode. A-B Play Mode From MP3 or voice mode: 1) Press the A-B/REC button to select starting point A; 2) Press the A-B/REC button to select end point B, then it will repeat between A-B. 3) Press the A-B/REC button again to cancel setting and resume playing MP3 or voice. Lock function From MP3 and voice standby/ play/ pause/ record mode, you can push the HOLD switch in the direction of the arrow to lock all the other buttons. [. . . ] Notice: The lyric file name must be the same as the corresponding music file with the . It must also be saved in the same directory. Only the lyrics with time indication will be displayed properly. uSB mode Plug the Player into the USB port of a PC , corresponding icons will appear on the LCD screen. [. . . ]