User manual LENOVO 3000 Y310

[. . . ] Lenovo 3000Y310 UG. book Page 1 Friday, September 14, 2007 4:24 PM Lenovo 3000 Y310 User Guide Note Please read Read This First before operation of your computer Includes: · Important safety information · Tips for taking care of your computer · Function and features · Service and troubleshooting · Warranty information Lenovo 3000Y310 UG. book Page 2 Friday, September 14, 2007 4:24 PM Note Before using this information and the product it supports, be sure to read the following: · Safety and Warranty Guide included in the package with this publication. · Wireless related information in "Appendix D, Notices, " on page 65. · Regulatory Notice included in the package with this publication. First Edition (August 2007) © Copyright Lenovo 2007. GOVERNMENT USERS ­ RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS. [. . . ] Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. Commit your password to memory, and press the Enter key. To enable the password for power-on, select Password on boot, and press the Enter key. Select Yes in the Setup Confirmation window. Note: If the password has been forgotten and cannot be made available to the servicer, there is no service procedure to reset the password. The system board must be replaced for a scheduled fee. Chapter 3. Getting Started 33 Lenovo 3000Y310 UG. book Page 34 Friday, September 14, 2007 4:24 PM Getting Started If you set a password and enable it, the password prompt appears on the screen whenever you turn on the computer. You must enter the correct password to start the computer. If the Password on boot is disabled in step 7, no password is needed to power-on your Notebook, but you still need the password to enter BIOS Setup Utility. In the BIOS Setup Utility screen, select Security using the cursor directional keys. Select Set User Password, and press the Enter key. Set your password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field. Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. Commit your password to memory, and press the Enter key. Select Yes in the Setup Confirmation window Note: User password can be only set when a supervisor password is set. User password can be also used for the power-on password. If you enter BIOS Setup Utility with the User password, only a small part of the settings can be used. In the BIOS Setup Utility screen, select Security using the cursor directional keys. Select Set HDD Password, and press the Enter key. [. . . ] You can send license inquiries, in writing, to: Lenovo (United States), Inc. 54 Research Triangle Park, NC 27709 U. S. A. Attention: Lenovo Director of Licensing Lenovo GROUP LTD. PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ]