User manual LENOVO THINKPAD P50S (20FL000DFR)

[. . . ] ThinkPad P50 User Guide Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety information” on page vi • Appendix F “Notices” on page 161 The latest Safety, Warranty, and Setup Guide and the Regulatory Notice are available on the Lenovo Support Web site at: http://www. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. Xi xii xiii xiii xiii Using the trackpad with buttons . Replacing the cap on the pointing stick . [. . . ] Set the timeout option for CIRA connection to be established. Selectable second values are from 1 to 254. If you select 0, use 60 seconds as the default timeout value. keyboard Beep • Enabled • Disabled RAID RAID • Disabled • Enabled 74 ThinkPad P50 User Guide Table 2. Config menu items (continued) Menu item Submenu item Value Comments If you select 255, the waiting time for establishing a connection is unlimited. Console Type • PC ANSI • VT100+ • PC-ANSI • VT-UTF8 Select the console type for AMT. Note: This console type should match the Intel AMT remote console. Date and Time menu To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu. Use the cursor keys to select System Date or System Time. Security menu To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu. The following table lists the Security menu items. The menu items might change without notice. Depending on the model, the default value might vary. Attention: The default configurations are already optimized for you. Improper change of the configurations might cause unexpected results. Security menu items Menu item Password Submenu item Supervisor Password Lock UEFI BIOS Settings Value • Disabled • Enabled • Disabled • Enabled Enable or disable the function that protects items in ThinkPad Setup from being changed by a user who does not have the supervisor password. If you set the supervisor password and enable this function, no one but you can change any items in ThinkPad Setup. If you select and enable Password at unattended boot, a password prompt is displayed when the computer is turned on, from either a power-off state or hibernation state, by an unattended event such as a Wake on LAN attempt. If you select Disabled, no password prompt is displayed; the computer goes ahead and loads the operating system. To prevent unauthorized access, set the user authentication on the operating system. If you select and enable Password at restart, a password prompt is displayed when you restart the computer. If you select Disabled, no password prompt is displayed; the computer goes ahead and loads the operating system. [. . . ] Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. [. . . ]