User manual LENOXX CD203

[. . . ] COMPACT DISC PLAYER WITH AM/FM STEREO CASSETTE RECORDER MODEL CD-203 OPERATING INSTRUCTIONS PLAYS MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT RECEIVES AM/FM STEREO BROADCASTS RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE FM STEREO AND POWER LED INDICATORS 2 WAY POWER - AC/DC USES 8 SIZE C BATTERIES (not included) PLEASE READ CAREFULLY BEFORE USE IB-CD203(AD)-WM-E-012503 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in SERVICE the literature accompanying the appliance. SEE BOTTOM OF SET 1. 9. IMPORTANT SAFETY INSTRUCTIONS 10. [. . . ] Lift the right corner of the CD DOOR to open it and place a CD in the CD compartment. The label side of the CD should face upward. The display will show the total tracks of that CD. lamp will be steady on, the player plays all the tracks once. POWER lamp 3 4 POWER lamp PLAY/PAUSE Track PLAY/PROG. number lamp TIP: will show in the display if there is no CD disc in the CD compartment or the CD disc is upside down. 5 IB-CD203(AD)-WM-E-012503 USE THESE BUTTONS ADDITIONAL OPERATIONS FUNCTION switch Open the CD DOOR by lifting here FOR VOLUME control PLAY/ PAUSE STOP SKIP/SEARCH FORWARD SKIP/SEARCH BACKWARD Track number TIP When CD play is paused, the track number current playing will flash and no music will play. To resume play, press the PLAY/ PAUSE button again, the track number will stop flashing and music will play. If you bump the set during CD play, the music will stop or skip for a few seconds. This case is normal for this type of player. To Adjust the volume Stop playback Press or Adjust VOLUME control STOP button The track number current playing will flash during pause. FORWARD BACKWARD or Press and hold down while playing until you find the point. Press the STOP button first, then lift the CD DOOR. Rotate the FUNCTION switch to TAPE position, the AC power lamp goes off. Pause playback Go to the next track Go back to the previous track Locate a point in a song Remove the CD Turn off the power 6 IB-CD203(AD)-WM-E-012503 PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play mode (refer to page 8). PLAY/PAUSE button FUNCTION switch FORWARD REPEAT button BACKWARD 1. Rotate the FUNCTION switch to CD position. Select the track by pressing or , and then press 3. To repeat a single track (song) Press Press the REPEAT button once, the REPEAT lamp will be steady on. Press the REPEAT button twice, the REPEAT lamp will flash. During programmed play, press the REPEAT button twice, both the REPEAT and PLAY/PROG. lamps will flash. . Display shows PLAY/ PROG. REPEAT all the tracks (all songs) PY LA / PO. RG RPA EET programmed tracks PY LA / PO. RG RPA EET To cancel Repeat Play Press the REPEAT button until the REPEAT lamp goes off. 7 IB-CD203(AD)-WM-E-012503 PLAYING CD TRACKS IN PROGRAMMED OR PROGRAM PLAY/PAUSE FORWARD RANDOM ORDER 1. Programmed Play You can make a program of up to 16 tracks in the order you want them to be played. RANDOM BACKWARD 1. Rotate the FUNCTION switch to CD position. [. . . ] Do not store tape for any length of time in a hot, moist or dusty place. Cleaning the Tape Head Wipe the tape head, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operation for optimum playback and recording quality. After cleaning, insert a tape when the areas cleaned are completely dry. RECORD/PLAYBACK HEAD PINCH ROLLER ERASE HEAD Cleaning the Cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzene. CAPSTAN COTTON SWAB NOTE: In order to see and clean the tape head, you may have to press PLAY first. 16 IB-CD203(AD)-WM-E-012503 TROUBLE SHOOTING Problem The power is not on. General Insert the AC plug into a wall outlet securely. Make sure the batteries are installed correctly and Make sure the FUNCTION switch is at the right position as you want. [. . . ]