User manual LENOXX HT400

[. . . ] MODEL HT-4OO Digital Home Theater Audio System Turns Your DVD Player Into a Home Theater The Perfect Sound System for Your DVD Player · Just add your TV & DVD player; everything else is in the box. · Incredible surround sound, perfect for DVD viewing & enhanced TV game experience. PLEASE READ CAREFULLY BEFORE USE IB-HT400-WM-E-110502 SAFETY INSTRUCTIONS WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. FCC NOTE WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS 1. [. . . ] The sound will come out of all 5 speakers plus the subwoofer. NOTE: On some TVs, you may have to activate the audio out jacks of your TV. 6. Insert the AC power cord into an AC outlet. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the POWER button on the REMOTE to turn the set on (or off). Press the SOURCE button several times till the TV/VCR indicator lights. Go to Page 20 for detailed instructions. NOTE: Your cable or antenna connection to your TV are not touched with this connection. Leave your antenna cable to your TV as you normally would. No changes will be made to your current antenna connections. 12 IB-HT400-WM-E-110502 Home Theater System + TV + DVD Player YOUR TV SET TV + DVD CONNECTIONS NOTE: Some newer TV sets have several VIDEO INPUT jacks. You may use one of these for your DVD player and the others for connecting to the VIDEO OUT jack (for TV game use). If your set is older and only has a single VIDEO INPUT jack, you may buy a switch box to change video inputs from DVD to game video out (Game), etc. VIDEO CABLE (INCLUDED) NOTE:For DVD viewing, your DVDs Video cable must go to your TV sets VIDEO input jack. NOTE: On some TVs, this jack is in the front. YOUR DVD PLAYER COAXIAL CABLE (INCLUDED) CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET). BACK OF HT-400 HOME THEATER 1. Insert the COAXIAL cable (included) into the DVD INPUT jack on the back of your HOME THEATER SYSTEM, and into the DIGITAL (COAXIAL) jack on your DVD player, this will allow your DVDs Dolby Digital audio or DTS sound to play through your HOME THEATER SYSTEM. NOTE: For a Dolby Digital or a DTS (5. 1 channel) recorded DVD disc, the sound will come out of all 5 speakers plus the subwoofer. For a Stereo DVD disc (2 channel), the sound will only come out of the 2 front speakers plus the subwoofer. This set will decode and automatically play back whatever sound system was recorded on the DVD or audio disc. To manually change stereo (2 channel) audio to Dolby Pro Logic, press the SURROUND button. The sound will come out of all 5 speakers plus the subwoofer. NOTE: Make sure your DVDs AUDIO OUTPUT is set to DIGITAL. 2. 7. Insert the video cable into the VIDEO OUT jack on the back of your DVD player, and into the VIDEO IN jack on your TV (this may be already connected from before). Insert the AC power cord into an AC outlet. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the POWER button on the REMOTE to turn the set on (or off). [. . . ] Adjust front balance by pressing the volume controls of the left and right speakers on the REMOTE (see Page 22). Check that the speakers and components are connected securely. Insert all wires firmly, follow the setup pages starting on Page 7. Depending on the digital sound input, the output signal may at times be monaural or stereo even if the main sound track is recorded in Dolby Digital format. [. . . ]