User manual LENOXX PH319

[. . . ] ® 13 MEMORY SPEAKERPHONE WITH HEADSET MODEL: PH-319 / PH-319P / PH-319R OPERATING INSTRUCTIONS SPEAKERPHONE WITH LED INDICATOR HANDS-FREE HEADSET INCLUDED 13 MEMORY TELEPHONE TONE/PULSE SWITCHABLE DIALING RECEIVER VOLUME CONTROL FLASH & REDIAL BUTTON DESK OR WALL MOUNTABLE HOLD BUTTON WITH INDICATOR (3 ONE TOUCH & 10 TWO TOUCH) NOTE: READ AND FOLLOW THESE INSTRUCTIONS BEFORE USING YOUR TELEPHONE PH-319021201 MS V. 1 E IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury: 1. Read and follow all instructions and warnings. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] Select the desired function of the ringer. ON - Normal setting, rings on incoming calls. O F F - The ringer does not sound, for undisturbed privacy. NOTE: If your RINGER switch is in OFF position, only THIS phone will not ring, other phones in your home on the same line will ring. TONE/PULSE SWITCH Select the type of dialing that you desire or that your telephone system requires. TONE - The phone will operate using tone dialing. (If your phone doesnt dial out, switch to PULSE. ) PULSE - The phone will dial using rotary pulse dialing . NOTE: Even when your phone is set to pulse service, this phone can be switched to temporary tone dialing for access to services that require tone signaling like button after dialing in pulse and your computer systems. Just press the buttons can now be used for tone signaling for this call only. NOTE: When installation is completed, pick up the HANDSET to listen for dial tone before using speakerphone or headset for the first time. 6 PH-319021201 MS V. 1 E INSTALLATION INSTRUCTIONS HEADSET CONNECTION Connect the plug of the HEADSET into the HEADSET jack on the right side of the phone. NOTE Adjust the SPEAKERPHONE VOLUME CONTROL to the desired sound level while the other party is talking. If a squealing or whistling sound is heard, reduce the speakerphone volume setting or move the microphone away from your mouth. TELEPHONE OPERATION RECEIVING CALLS AS A NORMAL TELEPHONE When your telephone rings 1. Lift the HANDSET and speak into the mouth piece of the HANDSET. Remember to hang up by pressing the SPEAKERPHONE button again. If you start your conversation with the HEADSET and you want to switch to speakerphone, just plug the HEADSET out of the jack. NOTE 1: Be sure to notify the other party that you are using the speakerphone mode, the other party may not wish anyone else to hear the conversation. NOTE 2: Adjust the SPEAKERPHONE VOLUME CONTROL to the desired sound level while the other party is talking. If a squealing or whistling sound is heard, reduce the speakerphone volume setting. Insert the HEADSET plug into the HEADSET jack on the right side of the phone as described on the previous page. When the phone rings, press the SPEAKERPHONE button. Adjust the VOLUME CONTROL on the right side of the phone. When you finished the conversation, press SPEAKERPHONE button again. Insert the HEADSET plug into the HEADSET jack on the right side of the phone as described on the previous page. [. . . ] If your other telephones are ROTARY type phones, your line may be conditioned to accept PULSE dialing only. Move TONE/PULSE switch to PULSE position. Contact your phone company to have your line changed to TONE and PULSE service. Static noise on line or cannot hear Replace the coil cord. Any phone store has calling party or calling party these cords in different lengths. [. . . ]