User manual LENOXX PH323

[. . . ] 13 MEMORY SPEAKERPHONE MODEL: PH-323 OPERATING INSTRUCTIONS SPEAKERPHONE WITH LED INDICATOR HANDS-FREE HEADSET INCLUDED 13 MEMORY TELEPHONE (3 ONE-TOUCH & 10 TWO-TOUCH) TONE/PULSE SWITCHABLE DIALING RECEIVER VOLUME CONTROL FLASH & REDIAL/PAUSE BUTTON DESK OR WALL MOUNTABLE HOLD BUTTON WITH INDICATOR PLEASE READ CAREFULLY BEFORE USE IB-PH323(MS)-WM-E-051003 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury: 1. Read and follow all instructions and warnings. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] NOTE: If your RINGER switch is in OFF position, only THIS phone will not ring, other phones in your home on the same line will ring. TONE/PULSE SWITCH Select the type of dialing that you desire or that your telephone system requires. TONE - The phone will operate using tone dialing. (If your phone doesnt dial out, switch to PULSE. ) PULSE - The phone will dial using rotary pulse dialing. NOTE: Even when your phone is set to pulse service, this phone can be switched to temporary tone dialing for access to services that require tone signaling like button after dialing in pulse and your computer systems. Just press the buttons can now be used for tone signaling for this call only. NOTE: When installation is completed, pick up the HANDSET to listen for dial tone before using speakerphone or headset for the first time. 6 IB-PH323(MS)-WM-E-051003 INSTALLATION INSTRUCTIONS HEADSET CONNECTION Connect the plug of the HEADSET into the HEADSET jack on the right side of the phone. NOTE: This phone may be used in 3 ways: 1. Insert the HEADSET plug into the HEADSET jack described as above. Press the SPEAKERPHONE/HEADSET button to get a dial tone. When the phone rings, press the SPEAKERPHONE button, it is not necessary to lift the HANDSET. Adjust the VOLUME control on the right side of the phone. When you finished the conversation, press SPEAKERPHONE / HEADSET again. Select the desired dialing mode with the TONE / PULSE switch (do this only the first time after installation). Press SPEAKERPHONE / HEADSET to get dial tone - no need to lift the HANDSET. Adjust the VOLUME control on the right side of the phone. To hang up, press the SPEAKERPHONE / HEADSET button again. To switch the conversation from speakerphone to private, simply lift the HANDSET or use the HEADSET included. If you start your conversation with the HANDSET and want to switch to speakerphone, press the SPEAKERPHONE / HEADSET button and replace HANDSET. Remember to hang up by pressing the SPEAKERPHONE / HEADSET button again. If you start your conversation with the HEADSET and want to switch to speakerphone, just pull off the HEADSET plug from the jack. NOTE 1: Be sure to notify the other party that you are using the speakerphone mode, the other party may not wish anyone else to hear the conversation. [. . . ] If your other telephones are ROTARY type phones, your line may be conditioned to accept PULSE dialing only. Move TONE/PULSE switch to PULSE position. Contact your phone company to have your line changed to TONE and PULSE service. Any phone store has these cords in different lengths. [. . . ]