User manual LENOXX SL6703

[. . . ] ® 3 CD HOME STEREO AM/FM DUAL CASSETTE RECORDER WITH REMOTE CONTROL OPERATING INSTRUCTIONS MODEL SL-6703 PROGRAMMABLE CD PLAYER WITH REPEAT PLAY FLUORESCENT MULTI-COLOR VFD DISPLAY INCLUDES MULTI-FUNCTION REMOTE CONTROL DIGITAL KARAOKE SYSTEM RECEIVES AM/FM STEREO BROADCASTS EASY TO OPERATE CONTROLS RECORDS FROM CD, TAPE OR RADIO DELUXE DYNAMIC SPEAKER SYSTEMS PLEASE READ CAREFULLY BEFORE USE IB-SL6703(TA)-PRADO-E-091802 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in SERVICE the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS 1. Do not block any ventilation openings, install in accordance with the manufacturers instructions. [. . . ] Repeat steps 2&3 until all the desired tracks are programmed. Press the PLAY button to start programmed play. and the track number being played will show in the display. To change the current program Just create a new program following the programing procedure. To cancel Program Play Press the STOP button on the main set or STOP/PROGRAM button on the REMOTE control twice, PRG. will disappear from the display. 8 IB-SL6703(TA)-PRADO-E-091802 LISTENING TO THE RADIO 1 FM MODE Connect the supplied AC power cord (see page 3). 2 63 4 1 2 3 4 Press the POWER switch, the VFD display will turn on. Set the FUNCTION switch to RADIO position. Set the BAND switch to the proper band position (AM or FM), and set the FM MODE switch to STEREO or MONO. Tune into the station you prefer using the TUNING control. Adjust for the clearest sound. 5 6 This indicator will light up when receiving FM Stereo broadcasts. You may rotate the TONE control counterclockwise to intensify bass, and clockwise to intensify the treble. 9 IB-SL6703(TA)-PRADO-E-091802 USE THESE BUTTONS FOR ADDITIONAL OPERATIONS FM MODE FUNCTION VOLUME TIP · If the FM broadcast is To Adjust the volume Turn off the Radio Press or Set VOLUME control (UP or DOWN). Set the FUNCTION switch to TAPE position or press the POWER switch. noisy, set the FM MODE switch from STEREO to MONO. set has an electronic volume control, you may raise or lower the volume by pressing the VOLUME UP and DOWN buttons. · This To improve AM broadcast The AM antenna is magnetic bar within the reception system. Change position of the set for the best AM reception. To improve FM broadcast Unwrap and fully extend the FM antenna for the reception best FM reception. FM ANTENNA To turn off the sound instantly Press the MUTE button on the REMOTE. 10 IB-SL6703(TA)-PRADO-E-091802 PLAYING A TAPE 1 2 4 3 Connect the supplied AC power cord (see page 3). 1 2 3 STOP/EJECT Press the POWER switch, the VFD display will turn on. To record from a radio, set the FUNCTION switch to RADIO position, and tune into the station you want (see page 9). To record from the microphone, set the FUNCTION switch to the TAPE position, and plug the microphone (not included) into the MIC JACK. To record from the DECK A, set the FUNCTION switch to the TAPE position, and follow the steps to play a TAPE (see page 11). 4 RECORD Press the RECORD button to start recording. (The PLAY button is depressed automatically. ) 5 REWIND PLAY To hear what you recorded, set the FUNCTION switch to TAPE position, then press REWIND and PLAY. 14 IB-SL6703(TA)-PRADO-E-091802 USE THESE BUTTONS ADDITIONAL OPERATIONS FOR TIP · To erase a recording, just start a new recording, and the old one is automatically replaced. see page 19 for notes on cassettes. DUBBING SPEED SWITCH STOP/EJECT PAUSE To Stop recording Pause recording Press or Set STOP/EJECT button PAUSE button Press the button again to resume recording. DUBBING SPEED switch from NORMAL to HIGH speed. Press the STOP/EJECT button and press the POWER switch, the VFD display will go off. · Adjust recording speed when copying tapes Turn off the power 15 IB-SL6703(TA)-PRADO-E-091802 SINGING ALONG WITH KARAOKE FUNCTION MICROPHONE JACK 2 VOLUME Connect the supplied AC power cord (see page 3). 1 2 Insert microphone plug into the microphone jack. To avoid mic howling, lower the volume level setting first. NOTE: Microphone is not included, you may purchase a microphone where you bought this set. To sing along with the CD player, set the FUNCTION switch to CD position, insert a KARAOKE CD disc and follow the steps to play a CD (see page 5). To sing along with the tape, set the FUNCTION switch to the TAPE position, insert a KARAOKE TAPE into deck A or B, and follow the steps to play a TAPE (see page 11). 3 PLAY Press the CD PLAY/PAUSE button on the CD player or press the PLAY button on deck A or B. 4 Adjust the volume controls (UP or DOWN) to achieve the best effect. 16 IB-SL6703(TA)-PRADO-E-091802 USE THESE OPERATIONS BUTTONS FOR ADDITIONAL TONE VOLUME CONTROL To Adjust the MIC volume Press or Adjust VOLUME control Adjust the CD or TAPE music volume VOLUME control Intensify bass Rotate the TONE control counterclockwise Intensify treble Rotate the TONE control clockwise TIP: If there is squealing or howling (feedback) noise during KARAOKE use, move the microphone away from the speakers or turn down the volume. 17 IB-SL6703(TA)-PRADO-E-091802 PRECAUTIONS On Safety laser used in As thesection beam be harmfulthe CD If the set is brought directly from a player may to the cold to a warm location, or is placed eyes, do not attempt to disassemble the cabinet. [. . . ] Make sure the safety tab on the cassette is in place (see page 19). Make sure the FUNCTION switch is at TAPE position. Make sure the tape is inserted properly. Make sure the safety tab of the cassette is in place. [. . . ]