User manual LERVIA KH 3158 FLOOR VACUUM CLEANER

[. . . ] Otherwise there is a danger of death by suffocation!Do not leave children unsupervised with the vacuum cleaner!Please ensure that no people or animals are hit by the vacuum cleaner!Before connecting the vacuum cleaner to the mains power supply you should ensure that the mains supply is 230 V ~ 50 Hz and is correctly equipped with a 16 Ampere fuse. [. . . ] Then reinsert the dust bag holder u together with the dust bag i. Close the cover and insert the suction hose connector } into the suction opening of the floor vacuum cleaner until it locks in place. Insert the tapered end of the telescopic suction tube R into the connector of the floor nozzle I until it locks in place. Insert the handle Q into the telescopic suction tube R until it locks in place. Please avoid any damage to the power cord!During use the power cord should be unwound as far as the yellow marking!Otherwise there is a danger of damage from overheating!During use the power cord should be unrolled at least as far as the yellow marking, but not past the red marking!The power cord should only be removed from the socket by pulling the plug!Disconnect the vacuum cleaner from the mains immediately if there are any malfunctions!If the vacuum cleaner / power cord is damaged or broken it should only be repaired by authorised and trained specialists!Keep the height adjuster Y held down in the direction of the arrow (see illustration D). The floor nozzle I can be changed over manually - the brush strip is folded in and out. Operate the changeover switch O of the floor nozzle in order to fold out the brush strip. This setting allows you to vacuum up loose dust, fluff and hairs on a smooth and solid surface, e. This setting makes it possible to vacuum up fluff and hairs on fibre and soft surfaces, e. For your individual room cleaning requirements the vacuum cleaner is supplied with a separate holder for three additional nozzles e. The brush nozzle y with rotating brush head is suitable for vacuuming sensitive fabrics and other sensitive items. The additional nozzles can be attached to the suction tube R, as well as to the handle Q of the suction hose. Turn the control S clockwise along the scale D in order to increase the suction power. Turn the control S anticlockwise along the scale D to reduce the suction power. Use the manual suction regulator W on the handle (see illustration D) to reduce the selected suction power temporarily without moving the rotating control S. [. . . ] The device should never be cleaned with moisture! Use a brush or tweezers to remove threads from the floor nozzle I, or vacuum these off from time to time with the crevice nozzle r. Electrical equipment should not be thrown into the domestic waste!According to European directive 2002 / 96 / EC pertaining to old electrical and electronic equipment and its implementation in national law, worn out electrical equipment must be collected separately and recycled in an environmentally friendly manner. [. . . ]