User manual LERVIA KH 1280

[. . . ] · Only ever store the steam iron away once it has cooled down. · Only ever iron with the temperature settings instructed by the care instructions for the material. You could otherwise cause damage to the material. If you do not know the care instructions, start with the lowest temperature setting. [. . . ] · Should the steam iron be dropped or should there be damages to the power cord or the power plug, you may not use the appliance. Have the appliance checked or repaired by qualified technicians. t !Important! · Should the care instructions for a clothing article not mention ironing, (Symbol ), you should not iron that clothing article. You could otherwise cause damage to the clothing article. · You may only fill the water reservoir with tap water. You will otherwise damage the steam iron. · You may not clean the steam iron with solvents, alcohol or abrasive cleaning agents. Proper use The steam iron is strictly intended for ironing clothes. You may only use the iron in a closed room and in the private household. All other use is deemed improper use. 5 t Before the First Use Remove the steam iron from the packaging. Remove all stickers and films from the steam iron and the gliding sole . Plug the power plug into a power socket of 230 V~/50 Hz. Set the temperature control to the position "Max". Heat the steam iron for several minutes on the highest setting. Iron on a piece of scrap material to remove any possible unclean patches from the gliding sole. Operating Elements, ill. A Movable cable guide Temperature control light Cable winding space Standing foot Gliding sole Water nozzle Filler opening for the water reservoir Steam amount control Button for the steam spray Button for water fog Temperature control Handle Operation Filling with Tap Water When it is cool, place the steam iron in a horizontal position on its gliding sole . Open the filler opening for the water reservoir . Fill the reservoir with tap water using the measuring cup, at most to the "Max" marking. Close the water reservoir filler opening, making sure it "clicks" shut. 6 Plugging In and Ironing Dry ironing without steam is possible at all temperatures, steam ironing is only possible from setting 2. Plug the power plug into a power socket of 230 V~/50 Hz. t !Important! Should the care instructions for an article of clothing not mention ironing, (Symbol ), you should not iron that clothing article. You could otherwise cause damage to the clothing article. [. . . ] Wrap the power cord around the cable winding space , ill. Place the cool steam iron horizontally on a soft, clean base. Cleaning Casing Clean the casing only with a soft dry cloth. Metal Parts Clean the metal parts with a cloth slightly moistened with water and a mild, non-foaming cleaning agent. Troubleshooting The steam iron puts out only little or no steam The water reservoir in the steam iron is empty. Fill the water reservoir with tap water (see "Filling with Tap Water"). [. . . ]