User manual LEVEL ONE FBR-1418TX

[. . . ] LevelOne FBR-1418TX 1W, 4L Broadband Router User Manual V1. 1 i Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. [. . . ] My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you when your IP Mode is Static IP Address. Server IP Address: the IP address of the L2TP server. L2TP Account and Password: the account and password your ISP assigned to you. If you don't want to change the password, keep it empty. 18 Maximum Idle Time: the time of no activity to disconnect your L2TP session. Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will automatically connect to ISP after system is restarted or connection is dropped. 19 4. 4. 2 DHCP Server Press "More>>" The settings of a TCP/IP environment include host IP, Subnet Mask, Gateway, and DNS configurations. It is not easy to manually configure all the computers and devices in your network. Fortunately, DHCP Server provides a rather simple approach to handle all these settings. This product supports the function of DHCP server. If you enable this product's DHCP server and configure your computers as "automatic IP allocation" mode, then when your computer is powered on, it will automatically load the proper TCP/IP settings from this product. The settings of DHCP server include the following items: 1. DHCP Server: Choose "Disable" or "Enable. " Lease Time: this feature allows you to configure IP's lease time (DHCP client). IP pool starting Address/ IP pool starting Address: Whenever there is a request, the DHCP server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Domain Name: Optional, this information will be passed to the client. Primary DNS/Secondary DNS: This feature allows you to assign DNS Servers Primary WINS/Secondary WINS: This feature allows you to assign WINS Servers Gateway: The Gateway Address would be the IP address of an alternate Gateway. 20 This function enables you to assign another gateway to your PC, when DHCP server offers an IP to your PC. 4. 4. 4 Change Password You can change Password here. We strongly recommend you to change the system password for security reason. 21 4. 5 Forwarding Rules 4. 5. 1 Virtual Server 22 This product's NAT firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping. A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP. Virtual Server can work with Scheduling Rules, and give user more flexibility on Access control. For Detail, please refer to Scheduling Rule. For example, if you have an FTP server (port 21) at 192. 168. 123. 1, a Web server (port 80) at 192. 168. 123. 2, and a VPN server at 192. 168. 123. 6, then you need to specify the following virtual server mapping table: Service Port 21 80 1723 Server IP 192. 168. 123. 1 192. 168. 123. 2 192. 168. 123. 6 Enable V V V 4. 5. 2 Special AP Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony, 23 etc. [. . . ] You can ping a specific IP to test whether it is alive. 56 Appendiix A TCP//IIP Conffiigurattiion ffor Wiindows 95//98 Append x A TCP P Con gura on or W ndows 95 98 This section introduces you how to install TCP/IP protocol into your personal computer. And suppose you have been successfully installed one network card on your personal computer. If not, please refer to your network card manual. Moreover, the Section B. 2 tells you how to set TCP/IP values for working with this NAT Router correctly. [. . . ]