User manual LEXIBOOK DJ020

[. . . ] Important note: all the files stored into the unit's internal memory will be lost when replacing the batteries. Make sure you transfer the files to your computer before changing the batteries. INSTALLING THE SOFTWARE AND THE CAMERA DRIVER Follow these instructions to install the "Photo Impression" software and the camera driver on your computer system. You will need to reboot your computer after the driver installation. [. . . ] Use the Up (6) and the Down (7) buttons to display the next or the previous photo. Note: If there are no pictures stored in the camera's built-in memory, the playback mode is not available. Deleting one file in playback mode In playback mode, use the Up (6) and the Down (7) buttons to display the desired photo then the Shutter button (3) twice to delete it. DELETING PHOTOS Deleting the last photo taken Turn on the unit then press repeatedly the Power/Mode button (4) until the D icon is displayed on the screen. Within 3 seconds, press the Shutter button (3) to delete the last photo taken. Note: to cancel the deletion, wait for the D icon to disappear from the screen or press the Up (6) or the Down (7) buttons. Deleting all photos Turn on the unit then press repeatedly the Power/Mode button (4) until the F icon is displayed on the screen. Within 3 seconds, press the Shutter button (3) to delete all the photos stored in the camera's built-in memory. Note: to cancel the deletion, wait for the F icon to disappear from the screen or press the Up (6) or the Down (7) buttons. In "Single shooting" mode, press repeatedly the Power/Mode button (4) until the "Self-timer" icon appears in the upper-right corner of the LCD screen. Then press the Shutter button (3) within 3 seconds to turn on the self-timer function. The digital camera will take a picture 10 seconds later. Note: The self-timer feature is automatically turned off after the picture has been taken. sELECTING THE PHOTO RESOLUTION In "Single shooting" mode , press repeatedly the Power/Mode button (4) until one of the resolution icons or is displayed on the screen. Then press the Shutter button (3) within 3 seconds to change the resolution. Wait a few seconds to confirm your choice; the unit will automatically go back to photo mode. Then press the Shutter button (3) within 3 seconds to change the image quality. Wait a few seconds to confirm your choice; the unit will automatically go back to photo mode. Then press the Shutter button (3) within 3 seconds to change the frequency. Wait a few seconds to confirm your choice; the unit will automatically go back to photo mode. dOWNLOADING YOUR PHOTOS AND YOUR VIDEOS 1. Turn on the camera, then connect it to your computer via the USB cable provided. [. . . ] This product is covered by our 1-year warranty. To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. Our warranty covers material or installation-related defects attributable to the manufacturer, with the exception of wear caused by failure to respect the instructions for use or any unauthorised work on the equipment (such as dismantling, exposure to heat or damp, etc). , Reference: DJ020series Designed in Europe ­ Made in China ©2010 Lexibook® United Kingdom & Ireland For any further information, please call Helpline: 0808 1003015 http://www. [. . . ]