User manual LEXIBOOK SM180

[. . . ] Should any abnormal function occur, remove the batteries and insert them again. Animated weather forecast symbols The SM180 weather station is capable of detecting barometric pressure changes, and based on the data collected, predicting the weather for the next 8 to 12 hours. When you install or change the unit's batteries, the weather forecast symbol flashes on the LCD screen to indicate that you need to set the current weather status. Use the "+ (12/24)" and "- (°C/°F)" keys to select the symbol corresponding to the current weather status. [. . . ] Barometric pressure trend The trend indicator shows the recent trend of the barometric pressure. Generally, bad weather is associated to a low atmospheric pressure and good weather to a high atmospheric pressure. In time display mode, press and hold the "MODE/SET" key until the weather station makes a "beep" sound and the hour's digits start flashing. Use the "+ (12/24)" and "- (°C/°F)" keys to increase or reduce the values, then press "MODE/SET" to confirm and adjust the next setting. Press the "MODE/SET" key to confirm your selection and go back to time display mode. You can change it when travelling in cities in different time zones. The day of the week can be displayed in 8 different languages: German (GE), French (FR), Spanish (ES), Italian (IT), Dutch (NE), Danish (DA), Russian (RU) or English (EN). The clock loses its time information when the batteries are removed. During the setting, the unit goes automatically back to the time display mode after a few seconds of inactivity. date display In time display mode , press the "MODE/SET" key once to display the date. Once in date display mode, the unit goes automatically back to the time display mode after a few seconds of inactivity. The icon is displayed on the LCD screen when the unit is in alarm mode. To set the alarm time, press and hold the "MODE/SET" key until the weather station makes a "beep" sound and the hour's digits start flashing. Use the "+ (12/24)" and "- (°C/°F)" keys to adjust the hour, then press "MODE/ SET" to confirm and adjust the minutes. Use the "+ (12/24)" and "- (°C/°F)" keys to adjust the minutes, then press MODE/SET to confirm and go to the next setting. Use the "ALARM" key to switch on or switch off the alarm. When the alarm rings, press the "SNOOZE/LIGHT" key to switch on the snooze function. The icon starts blinking and the alarm will ring again 7 minutes later. Press any other key than the "SNOOZE/LIGHT" key to stop it. The alarm will ring again the next day at the same time. [. . . ] Remove the batteries if the unit is not going to be used for an extended period of time. This product is covered by our two-year warranty. To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. Our warranty covers material or installation-related defects attributable to the manufacturer, with the exception of wear caused by failure to respect the instructions for use or any unauthorised work on the equipment (such as dismantling, exposure to heat or damp, etc. [. . . ]