User manual LEXIBOOK SMBABY1

[. . . ] A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product. The supply terminals are not to be short circuited. Remove the batteries if you are not going to use the product for a long period of time. wARNING: If the units malfunction or receive an electrostatic shock , press the RESET buttons. If this proves to be ineffective, remove the batteries and insert them again. Night li Use the light in t Place the unit in the child's bedroom, on a side table using the removable stand, on the door handle or above the bed using a strap (not included). Use the selector switch located on the top of the unit to turn on or turn off ("OFF" position) the "Sleep Guardian" function or to select one of the 5 modes: · Use the volume button with the slider on the back The "Sleep Guardian" feature can also be started or stopped manually with the "Star" button on the front . Night light mode Use the "Night light" On/Off button located on the top of the unit to switch on light in the moon. "Comfort Zone" indicator Press the cloud-shaped "Comfort Zone" button on the front of the Baby unit and the light in the moon will indicate if the conditions in the baby's room are comfortable. Green indicates good conditions (temperature between 16 and 20 degrees C° and humidity between 0 and 60 %). Red means out of comfort zone (temperature not between 16 and 20 degrees C° or humidity not between 0 and 60 %). "Baby Monitor" transmission mode Use the transmission mode switch located at the back of the Baby unit to select the desired transmission mode. Noise activated (default mode): the transmission starts only when noise is detected in the Baby's room. Permanent transmission from the Baby unit to the Parent unit. Note: This mode will use up the batteries more quickly. Transmission channel selection Use the channel selection switch on the back of the unit to select a transmission channel (1, 2 or ) for the Baby unit. Switch the parent unit On/Off Use the volume switch on the right side of the Parent unit to turn it on or turn it off. The LED lights up when the unit is powered on. adjust the volume of the baby monitor with the wheel. Turn the "Baby Monitor" feature On/Off Press the "Baby Monitor" On/Off button to switch on or switch off the "Baby Monitor" feature. [. . . ] In a bid to keep improving our services, we could implement modification on the colours and the details of the product shown on the packaging. Com Environmental Protection Unwanted electrical appliances can be recycled and should not be discarded along with regular household waste!Please actively support the conservation of resources and help protect the environment by returning this appliance to a collection centre (if available). 2, avenue de Scandinavie 9195 Courtaboeuf Cedex, France hereby declare under our full and sole responsibility, that the product: Name: Musical Baby Soother & Monitor Reference / type: SMBABY1 Maker: Lexibook® to which this declaration refers, complies with the essential requirements and any other provisions stated in Directive R&TTE (1999/5/EC). [. . . ]