User manual LEXIBOOK ST400

[. . . ] Notez le(s) code(s) à 1 ou 2 chiffres correspondant(s) (exemple : si la marque de votre TV est PHILIPS, le code correct est 00, si la marque de votre magnétoscope est SONY, le code correct est 2). Compatible with more than 3, 000 audio-visual devices, this universal remote control combines the functions of several remotes: TV, DVD/CD, Video Recorder (VCR) and Satellite (SAT/CBL). Before programming and using your remote control, install 2 x AAA/LR03 alkaline batteries (not included). to do so , open the battery compartment located at the back of the remote. [. . . ] If no key is pressed for more than 15 seconds, the setup ends automatically and the LED goes off. Use the Quick search if you didn't have the time to store the correct code during step 5 of the Auto search. Press the Pause key during the Auto search to enter the Quick search mode. CH key to start the Quick search: the device you want to program 2. If the device does not turn on, press the CH key every 2 seconds until it does. When the device turns on, the correct code has been found. promptly press the corresponding device key on the remote control to store the code and exit. Note: If you accidentally pressed on the _ key after the device has turned on, + press on the CH key right away and wait for 2 seconds to see if your device turns off. Check whether all applications of your device can be operated with the remote control keys. You are now ready to set another device, with the same procedure. Code and you need to try to program it again. Press and hold the key of the device you have programmed on the remote control for 3 seconds. The LED located on the top part of the remote control will turn on and then turn off after 3 seconds. You can exit the Auto and Quick search modes at anytime by pressing the In Auto search mode, the remote control searches the correct codes very quickly and you may not have enough time to store them (step 5 of the Auto search mode). It is recommended to use both the Auto search and the Quick search methods by pressing on the Pause key. When the correct code has been found, if the original remote control of the device you want to control with the ST400 didn't have a Power key, the device may not turn off but play, change channels or the sound will go off. end of the code list , and then remains on. You can browse through the tables + using the Fast Forward , Fast Rewind , CH and keys CH . _ If no key is pressed for more than 15 seconds, the setup procedures stop automatically, but the codes stored will not be lost or changed. In Auto search mode, all the function keys except the Pause , EXIT, TV, DVD, VCR and SAT keys can be pressed without exiting the mode. In Quick search mode, all the function keys except the Pause , EXIT, + Fast Forward , Fast Rewind , CH , CH , TV, DVD, VCR and SAT keys _ can be pressed without exiting the mode. During the Auto search mode, press the Pause key once to enter the Quick search mode. [. . . ] Note: Repeat steps 1 to 3 to switch off the child lock mode. Transport keys lock This feature allows you to use the Play , Pause , Stop , Record , Previous , Next , Fast forward and Fast rewind keys (transport keys) of your last active VCR, DVD or CD device while watching the TV or a satellite/cable channel without changing to DVD/CD or VCR mode. For example, you can watch the TV and use the transport keys to control your DVD player without pressing the DVD key on the remote control. note: The transport keys lock feature is automatic. [. . . ]