User manual LEXICON 200

[. . . ] ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED bY THE MANUFACTURER. Safety InStructIonS Notice For customers iF Your uNit is equipped With A poWer cord. WArNiNG: this AppLiANce shALL Be coNNected to A mAiNs socKet outLet With A protectiVe eArthiNG coNNectioN. the cores in the mains lead are coloured in accordance with the following code: GREEN and YELLOW - Earth BLUE - Neutral BROWN - Live As colours of the cores in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: the core which is coloured green and yellow must be connected to the terminal in the plug marked with the letter e, or with the earth symbol, or coloured green, or green and yellow. · the core which is coloured blue must be connected to the terminal marked N or coloured black. [. . . ] With DHCP enabled, the Ethernet switch/router should assign an IP address to each of the devices including your computer. The 200 units should come up in the main window. 20 vIRtUAL PRIvAte NetWoRKS (vPN) Virtual private networks (VPN) provide an encrypted connection (or tunnel) between networks or between a network and a user over a public network (such as the Internet). Instead of using a dedicated, real-world connection such as a leased line, a VPN uses virtual connections through the public network. The advantage to a VPN is that your computer can be virtually connected to a local network even though it is physically anywhere in the world where you have an internet connection. This can also be done in a safe manner not compromising your local network's security. If you would like to manage your 200 units remotely you should create a secure VPN connection. There are many solutions on the market today that provide VPN access. These products offer different features, methods of VPN, complexity of setup and maintenance, as well as varying levels of security. It is beyond the scope of this manual to recommend a VPN solution that will best suit the needs of your network, although you will need a VPN that is capable of passing UDP and TCP traffic (most do). The 200 has been tested against several solutions and should work with all VPNs that meet these criteria. Please work with your system administrator and Internet service provider to find a VPN that will best fit your network. Clock Rate Select your clock rate here, when the wordclock source is set to INTERNAL. Choose from 44. 1HKz, 48KHz, 88. 2KHz, or 96KHz. Analog Setup The Analog Setup sub-menu lets you adjust the following parameters: Analog Input Level - Increases or decreases the incoming analog signal before it reaches the processor(s). Analog Output Level - Increases or decreases the outgoing analog signal after it leaves the processor(s). Analog Type IVTM - Enable or disable the Type IV conversion system here. The dbx® Type IV Conversion System is a proprietary analogto-digital (A/D) conversion process that combines the best attributes of digital conversion and analog recording processes to preserve the essence of the analog signal when it is converted to a digital format. Global Mute - Mutes all signals from the 200. AES Setup The AES Setup sub-menu gives you the status of the following AES information: Data Validity - "Valid" indicates the data is OK. "Invalid" indicates that the Validity bit was set in a frame of incoming data and that the data attached to it may be corrupted. This bit may also be sent when the 23 transmitting device is paused. Mode - Select "Consumer" to send information in S/PDIF format. [. . . ] When this is selected the signal rate parameter is used to control rate. When this is selected the signal rate parameter is used to control rate. When this is selected the signal rate parameter is used to control rate. White Noise (correlated) -- sends identical white noise to all outputs White Noise (decorrelated) -- sends decorrelated white noise to all outputs. [. . . ]