User manual LEXICON CP-1 QUICK REFERENCE GUIDE

[. . . ] CP-1 Quick Reference Guide The Front Panel exicon DIGITAL AUDIO ENVIRONMENT PROCESSOR CP-1 I II SOURCE TAPE PRE POST INPUT LEVEL SYSTEM MUTE EFFECT MUTE POWER D OLBY SURROUND SOURCE MONITOR TAPE PRO LOG I C The Remote Control PANORAMA provides greater spaciousness and envelopment for either music or films. These programs can utilize left and right rear channels but are also effective using only two front loudspeakers. PANORAMA 1 2 BANK tems. [. . . ] VOLUME: UP and DOWN adjust the level of all channels simultaneously. SYSTEM MUTE turns off all outputs and lights both SYSTEM and EFFECT MUTE LEDs. EFFECTS MUTE turns off any effects added by the CP-1. (Pushing EFFECT MUTE while in system- mute mode turns the effects alone back on. ) DOLBY SURROUND SYSTEM EFFECT D OLBY SURROUND PRO MUTE PRO - L O G I C LOGIC Note To store a modified Preset program, press PARAM until the display reads: MEMORIZE PROGRAM, then press any of the 12 program keys to store all current settings in the corresponding User register. User registers automatically store changes as they are entered. The CP-1's User Bank can be cleared and reloaded with duplicates of the factory Preset programs at any time. Turn on the CP-1 while holding down PARAM. Continue to hold down PARAM for several seconds. Push EFFECT MUTE to clear and reload the User Bank and to restore all initial settings of Volume, Balance, Contrast, Configuration, etc. Push PARAM again to begin normal operation. Lexicon CP-1 Digital Audio Environment Processor Manufactured under license from Dolby Laboratories Licensing Corporation. [. . . ] Consult the subwoofer owner's manual or your dealer for proper placement of subwoofers. 10 11 12 Choose the diagram that most closely corresponds to your room and note its number. 3 Oak Park Bedford, MA 01730 USA Lexicon Part # 070-06620 Rev. 1. 0 Patents are pending on the CP-1 © 1988 Lexicon, Inc. [. . . ]