User manual LEXICON PCM 42

[. . . ] ADJUST acts as a soft knob for adjustment of one or more patched effect parameters. Each set of PCM 42 controls is organized into a matrix of as many as 10 rows and 10 columns. Simultaneously press Up and Down to return to 0. 0. SELECT moves you horizontally across the matrix. Up and Down move you vertically through the rows of the matrix. In Edit, Control or Tempo mode, a D indicates the presence of multiple parameters within a single matrix location. Press Load/D to cycle through all of the parameters; simultaneously press Load/D with either Up or Down to backstep. XXXXXXX D XXXXXXXXX 3. 6 XXXXXXXXXXXXXXXXX Your current matrix location is shown in the lower left of the display. [. . . ] A P, an R or a C preceding the number indicates you are in a Program, Register or Card Bank. If there is no number shown here, you are in Go mode. (See Edit. ) In Edit, Control or Tempo mode, ADJUST scrolls through the range of available settings for the displayed control . In Program Banks and Register Banks mode, ADJUST is patched to one or more effect parameters. Edit Press Edit to access all available parameters for the currently running effect. Turn ADJUST to alter the value of any displayed parameter. Control Press Control to access system parameters, MIDI controls, and global control of parameters such as Mix, Tempo, and Bypass type. Tempo Press Tempo to set temporelated values that affect the delay time and LFO rate parameters of the currently running effect. Tempo Any PCM 42 delay parameter (as many as 10 in some effects) and any time-based modulator can be individually assigned an absolute time or tempo value. You can set delay times in milliseconds, or in a ratio of echoes/beats which are linked to tempo. When you change tempo, the delay times will change to maintain the same rhythm at the new tempo. Use SELECT and Up and Down to locate matrix position 0. 0. Turn ADJUST to select any Tempo Rate from 40-400 BPM. A Bypass Mode parameter at Control mode 1. 3 allows you to select input muting, output muting, input and output muting, or bypass as alternatives. You can also assign the bypass function to an external controller. Pro mode gives you access to the full effect edit matrix whenever you press Edit. The edit matrix contains all effect parameters, as well as Patching and Modulation controls. The PCM 42 is shipped in Go mode. To change the Edit mode, press Control, use SELECT and Up and Down to locate matrix position 1. 0. Turn ADJUST to select Go or Pro. Store Press Store. The current program name will appear with a flashing cursor over the first letter of the name. Press Up or Down to select a new type of character (upper or lower case, numeric, symbolic, or blank). Turn SELECT to move the cursor to a new character. Press Load/D to display the name currently assigned to the ADJUST knob patch. [. . . ] Press Load/D to display the name currently assigned to the ADJUST knob patch. Use the same procedure for entering a new name. Press Load/D twice to move the D to the Register ID number in the lower left corner of the display. Use ADJUST or SELECT to choose the register where you want the effect saved. [. . . ]