User manual LEXMARK 350

[. . . ] 350 Series User's Guide July 2006 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. All other trademarks are the property of their respective owners. 740 West New Circle Road Lexington, Kentucky 40550 Safety information Use only the power supply and power supply cord provided with this product or the manufacturer's authorized replacement power supply and power supply cord. Connect the power supply cord to an electrical outlet that is near the product and easily accessible. [. . . ] or to navigate through the photos. to select a photo for printing. . The Photo Edit Mode menu appears. 9 Press 10 Press . or repeatedly until Crop appears at the bottom of the display, and the crop icon is highlighted. 11 Use the cropping tools shown on the display. Press 12 Press 13 Press 14 Press or to select the tool and or to use the selected tool. to save your changes and go back to the Photo Edit Mode menu. to go back to the photo selection screen. or to select the number of copies to print. when the image is not when the number of copies is set to 1 will deselect the image. Pressing Note: Pressing selected will select the image. 15 You can select more photos for printing and editing by repeating step 6 through step 14. 16 Press to go to the Print Preview screen. Editing photos 29 17 If you want to adjust the print settings: a Press . c Press 18 Press to save your selections, and then go back to the Print Preview screen. to print. Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing. Adjusting the brightness of photos 1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper. ) For more information, see "Loading paper" on page 18. 2 Insert a memory card or flash drive. For more information, see "Inserting a memory card" on page 19 or "Inserting a flash drive" on page 20. 3 Press 4 Press 5 Press 6 Press 7 Press 8 Press or . repeatedly until View and Select appears on the display. to continue. or to navigate through the photos. to select a photo for printing. . The Photo Edit Mode menu appears. 9 Press 10 Press or or repeatedly until Brightness appears on the display. to adjust the brightness of the photo. Note: The image on the display does not accurately reflect the image when printed. 11 Press 12 Press to save your changes and go back to the photo selection screen. or to select the number of copies to print. when the image is not Note: Pressing when the number of copies is set to 1 will deselect the image. Pressing selected will select the image. 13 You can select more photos for printing and editing by repeating step 6 through step 12. 14 Press to go to the Print Preview screen. Editing photos 30 15 If you want to adjust the print settings: a Press . c Press 16 Press to save your selections, and then go back to the Print Preview screen. to print. Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. [. . . ] When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product. Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances. [. . . ]