User manual LEXMARK 7100 Install Guide

[. . . ] 7100 Series All-In-One Safety information · Use only the power supply provided with this product or the manufacturer's authorized replacement power supply. [. . . ] 2 Load plain paper in the paper tray. Raise the paper exit tray, and then extend the paper guide. 3 Adjust the paper guides. 4 Lower the paper exit tray, and then extend the paper stop. 3 1 Prepare the All-In-One. 2 Connect the telephone line. See the User's Guide before adding additional equipment. Add a telephone. Add a telephone and answering machine. Make sure the power cord is pushed all the way into the connector. 2 1 2 1 3 1 1 2 2 3 4 3 Press Power. 4 Press + to scroll, and then press Select to enter your default language, and then your default country or region. 51 2 3 Press the keypad to enter the: Date using two digits for the month, day, and year. Time using the two digits for both hour and minute. Press Select. 2 1 *21H0070* P/N 21H0070 E. C. 21H003 © 2004 Lexmark International, Inc. All rights reserved. Continue with Step 4. . . 4 1 Install the print cartridges. 2 Remove the sticker and tape from the print cartridges. Open the scanner unit. 3 Insert the print cartridges. 4 Close the scanner unit. Left Right 1 2 1 2 3 If you are using your All-In-One with a computer, continue with the following step. If you are using your All-In-One without a computer, you are finished. Windows 5 Install the software. 1 Make sure your computer is on. 2 Connect the USB cable. 3 Click Cancel on all New Hardware Screens. 2 1 ! To prevent errors during installation: 1 Close all open programs. [. . . ] Important: After installation is complete, remember to enable your anti-virus software. Insert CD1. 4 1 Double-click: 1 2 2 www. lexmark. com [. . . ]