User manual LEXMARK C510

[. . . ] Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc. , Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U. S. A. In the United Kingdom and Eire, send to Lexmark International Ltd. , Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. [. . . ] Error: stackoverflow papertray -- papertray integer queries the paper tray that is currently selected. An integer is returned on the stack indicating which paper tray is currently in use. Valid integers are: 0 1 2 3 4 5 7 8 9 Tray 1 Tray 2 Multipurpose Feeder or Envelope Feeder Manual Paper Manual Envelope Tray 3 Multipurpose Feeder Tray 4 Tray 5 Error: stackoverflow 4-22 PostScript setpapertray integer setpapertray -- changes the active paper source for the next page through the end of job by setting the PageSize entry in the page device to the size loaded in the selected source and by setting MediaPosition to the selected source. The PageSize Policy page device parameter is not altered by this operator. Use the following integers to set the paper tray: 0 1 2 3 4 5 7 8 9 Tray 1 Tray 2 Multipurpose Feeder or Envelope Feeder Manual Paper Manual Envelope Tray 3 Multipurpose Feeder Tray 4 Tray 5 Notes: · If the Manual Paper or Manual Envelope source is selected, the ManualFeed page device parameter is set to true. · A rangecheck error is returned if a paper source that is not installed is selected. · If a setpapertray operator is issued for the back of a duplexed page, the printer ejects a blank back page, changes the paper source, and prints the information for the back side of the page on the front side of a page from the new paper source. The setting returns to the user default setting for the Paper Source menu item at the end of the print job. Errors: rangecheck, stackunderflow, typecheck 4-23 PostScript Envelope Size Support The literal names in Table 4-9 are also supported as operators in userdict. These operators change the image size, but do not change the active paper source. Therefore, when these operators are used, part of the image may be clipped. The boolean value is either: true false adds the extension does not add the extension See "Filename Extensions" on page 6-10. Error: stackoverflow currentmanualduplexmode integer currentmanualduplexmode queries the current value of the manual duplex mode. An integer is returned on the stack: 0 1 2 current job manual duplex mode is no manual duplex current job manual duplex mode is printing first sides of job current job manual duplex mode is printing second sides of job Error: stackoverflow 4-29 PostScript defaulttimeouts -- defaulttimeouts job manualfeed wait queries the user default settings of all timeouts. Three integers are returned on the stack: · JobTimeout system parameter 0 disabled (default) 15. . . 65535 seconds · ManualFeedTimeout page device parameter 0 disabled 1. . . 65535 seconds (default is device dependent) To find the default for your printer, see Table C-2 on page C-4. · WaitTimeout system parameter 0 disabled 15. . . 65535 seconds (default is 40 seconds) Error: stackoverflow deletefile filename deletefile deletes the specified file from the disk. Errors: invalidfileaccess, ioerror, stackunderflow, typecheck, undefinedfilename Note: An undefinedfilename error occurs if the file does not exist. 4-30 PostScript devcontrol string integer devcontrol boolean allows a host computer utility to manage resources on the flash or disk. It requires a string device name parameter, an integer command name parameter, and two command argument parameters. The device control operator performs a specified command on the specified device. The return values on the stack indicate: true false the command is successful the command is unsuccessful and returns an error code Table 4-12: devcontrol Operator Parameters Integer Command Name Parameter 1 5 8 9 10 11 12 13 14 15 16 17 18 19 19 20 20 21 22 23 24 27 Argument Parameter null null file null filename description password null password null filename password filename password password null password null filename password filename password null null null null devicename password filename password devicename null filename null null null null null null null null null file null Description Park disk heads Make contiguous flash file Set description of file Set device read/write password Set device write password Set file read/write password Set file write password Declare device read/write password Declare device write password Declare file read/write password Declare file write password Reset device password list Reset file password list Get device password Get file password Determine if device password is properly declared Determine if file password is properly declared Scan for bad block Abort bad block scan Quick bad block scan Flush the disk cache Be quiet when writing to disk 4-31 PostScript Table 4-13: Unsuccessful devcontrol Parameter Error Codes Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Meaning File system access has not been initialized Could not allocate file descriptor Some invalid argument was passed No such device Invalid access to file requested Argument too large (filename, buffer) Invalid file descriptor or filename Catch all error or device error Unable to allocate memory for buffer, data structure Device busy Device not currently mounted Attempt to perform illegal IO operation No space to update or create file Major change in file system for findnext() to function properly Corrupted file system on device Device already mounted Could not initialize file system Device not mounted No file entry located Bad file system on device Password required Aborted by callback Errors: invalidaccess, rangecheck, typecheck devdismount device devdismount -- dismounts the specified device by setting the Mounted device parameter for the specified device to false. Errors: invalidaccess, stackunderflow, undefinedfilename Note: An undefinedfilename error occurs when an invalid device name is used. 4-32 PostScript devforall proc scratchstring devforall -- executes the specified proc procedure for each storage device after pushing a substring on the stack that is the portion of the scratch string containing the device name. Errors: invalidaccess, rangecheck, stackoverflow, stackunderflow, typecheck, undefined devformat devicename pages action devformat -- formats (erases all data from) the specified device. [. . . ] Printer Model C510(n) Command LDECLARE LRESOURCE LDELETEPASSWORD LQUERYSEED LBYPASSPASSWORD KEY Page 3-95 3-96 3-98 X422 X422 C-1 PostScript Support APPENDIX C: PostScript Support The following tables list PostScript commands and identify printers that support them. For detailed information about PostScript emulation, see "PostScript Emulation" on page 4-1. Table C-1: Supplemental Operators Supported Not Supported Page numbers reference operator descriptions. Printer Model E230, E232, E234(n), E330, E332n C510(n) Operator Name appletalktype buildtime byteorder checkpassword currentfilenameextend currentmanualduplexmode currentuniversalsize defaulttimeouts deletefile devcontrol devdismount devforall devformat devmount devstatus diskonline diskstatus displayoperatormsg doidlefonts dojamrecovery doprinterrors doret Page 4-27 4-27 4-27 4-28 4-28 4-28 4-17 4-29 4-29 4-30 4-31 4-32 4-32 4-33 4-33 4-34 4-35 4-35 4-35 4-36 4-36 4-36 X422 C-2 PostScript Support Table C-1: Supplemental Operators (Continued) Supported Not Supported Page numbers reference operator descriptions. [. . . ]