User manual LEXMARK C530

[. . . ] C530, C532, and C534 Menus and Messages Guide May 2006 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. All other trademarks are the property of their respective owners. 740 West New Circle Road Lexington, Kentucky 40550 Edition notice July 2006 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. [. . . ] Assign Man View Restore · None ignores the Select Paper Feed command. · 0­199 allows a custom setting to be assigned. Displays the default setting assigned to each tray, drawer, None or feeder Returns all tray, drawer, and feeder assignments to the default settings Yes No *Settings appear only if the feature is supported. 30 HTML menu Menu item Font Name Description Sets the default font for HTML documents Note: The Times font will be used in HTML documents that do not specify a font. Settings Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Font Size Sets the default font size for HTML documents 1­255 pt Notes: Intl CG Times Intl Courier Intl Univers Joanna MT Letter Gothic Lubalin Gothic Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery · 12 pt is the default setting. · Font size can be increased in 1 point increments. Scale Scales the default font for HTML documents Notes: 1­400% · 100% is the default setting. · Scaling can be increased in 1% increments. Orientation Sets the page orientation for HTML documents Portrait Landscape Note: Portrait is the default setting. Sets the page margin for HTML documents Notes: 8­255 mm Margin Size · 19 mm is the default setting. · Margin size can be increased in 1 mm increments. Backgrounds Sets whether or not to print backgrounds on HTML documents Note: Print is the default setting. Do Not Print Print 31 Image menu Menu item Auto Fit Description Selects the optimal paper size, scaling, and orientation Notes: Settings On Off · Off is the default setting. · The On setting overrides scaling and orientation settings for some images. Invert Inverts bi-tonal monochrome images Notes: On Off · Off is the default setting. · The font size can be increased in 1-point increments. · This setting does not apply to GIF or JPEG images. Scaling Scales the image to fit the selected paper size Notes: Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width Orientation Sets the image orientation Note: Portrait is the default setting. Portrait Landscape Rev Portrait Rev Landscape · Best Fit is the default setting. · When Auto Fit is set to On, Scaling is automatically set to Best Fit. Security menu Menu item Max Invalid PIN Description Limits the number of times an invalid PIN can be entered Notes: Settings Off 2­10 · Off is the default setting. · This menu item only appears if a printer hard disk is installed. · Once a limit is reached, the jobs for that user name and that PIN are deleted. Job Expiration Limits the amount of time a confidential job stays in the printer Off before it is deleted 1 hour Note: Off is the default setting. 4 hours 24 hours 1 week 32 Network/Ports TCP/IP menu Use the following menu items to view or set the TCP/IP information. Note: This menu is only available for network models or printers attached to print servers. Menu item TCP/IP Activate Description Activates TCP/IP in the printer Settings Off On TCP/IP TCP/IP TCP/IP TCP/IP TCP/IP TCP/IP TCP/IP TCP/IP View Hostname Address Netmask Gateway Enable DHCP Enable RARP Enable BOOTP AutoIP Lets you view or change the setting Off On Shows the current TCP/IP hostname None Lets you view or change the current TCP/IP address information None TCP/IP Enable FTP/TFTP TCP/IP HTTP Server Enabled TCP/IP TCP/IP WINS Server DNS Server Lets you view or change the setting None IPv6 menu Use the following menu items to view or set the TCP/IP information. Note: This menu is only available for network models or printers attached to print servers. [. . . ] 5 Turn the printer power back on. 56 Parallel port <x> disabled · Press until Continue appears, and then press to clear the message. The printer discards any data received through the parallel port. · Make sure the Parallel Buffer menu item is not set to Disabled. 50 56 Serial port <x> disabled · Press until Continue appears, and then press to clear the message. The printer discards any data received through the serial port. · Make sure the Serial Buffer menu item is not set to Disabled. 56 Standard USB port disabled · Press until Continue appears, and then press to clear the message. The printer discards any data received through the USB port. · Make sure the USB Buffer menu item is not set to Disabled. 58 Too many flash options installed 1 Turn the printer power off. [. . . ]