User manual LEXMARK C910

[. . . ] Lexmark C910 User's Reference October 2001 www. lexmark. com Table of contents Chapter 1: Printer overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Print speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Paper handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Follow the instructions in the box to send the old cartridge back to Lexmark. You can also recycle some replacement hardware parts, such as the transfer belt and the fuser. If a prepaid shipping label is not available for your country, contact the place where you bought your printer for additional recycling information. WARNING: Lexmark does not recommend refilling used toner cartridges or purchasing refilled cartridges from a third party. Print quality and printer reliability cannot be guaranteed if you do. The printer warranty does not cover damage caused by using refilled cartridges. 132 39 Ordering supplies In the U. S. or Canada, call 1-800-438-2468 for information about Lexmark Authorized Supplies Dealers in your area. In other countries, contact the place where you bought your printer. You can also visit the Lexmark online store at www. lexmark. com to order supplies. Click the Web link on the bottom of this page. Replacing maintenance items as needed helps you maintain top performance, optimize print quality, and avoid printing problems. Ordering a fuser When the 80 Fuser Life Warning message appears on the display, you should order a new fuser. Use P/N 56P9900 to order a fuser for a 120 V printer. Use P/N 56P9901 to order a fuser for a 230 V printer. See Replacing the fuser for more information. Ordering an oil coating roll When the 85 Coating Roll Life Warning message appears on the display, you should order a new oil coating roll. Use P/N 12N0774 to order an oil coating roll. See Replacing the oil coating roll for more information. Ordering a transfer belt When the 80 Belt Life Warning message appears on the display, you should order a new fuser. Use P/N 56P9903 to order a transfer belt. See Replacing the transfer belt for more information. 133 Ordering a toner cartridge When the 88 <color> Toner Low message appears on the display, you should order a new toner cartridge. You can continue to print after the 88 <color> Toner Low message appears for a few hundred pages until the print fades or no longer prints satisfactorily, or until the 88 <color> Toner Empty message appears, at which time you must replace the toner cartridge to continue printing. Order the appropriate toner cartridge: Part number 12N0771 12N0770 12N0768 12N0769 Toner cartridge Black toner cartridge Yellow toner cartridge Cyan toner cartridge Magenta toner cartridge See Replacing a toner cartridge for more information. 134 40 Calling for service When you call for printer service, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution. You need your printer model type and serial number. Refer to the label on the inside of the front cover for this information. Note: The serial number is also listed on the menu settings page you can print from the Utilities Menu. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. [. . . ]