User manual LEXMARK C935

[. . . ] C935 Series User's Guide April 2007 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. All other trademarks are the property of their respective owners. 740 West New Circle Road Lexington, Kentucky 40550 Safety information Connect the power supply cord to a properly grounded electrical outlet that is near the product and easily accessible. Refer service or repairs, other than those described in the user documentation, to a professional service person. [. . . ] · Tray 2 is displayed only when it is installed. 96 Menu item Auto CR after LF On Off Description Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command Notes: · Off is the factory default setting. · Settings are duplicated in the PCL Emulation menu. Auto LF after CR On Off Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command Notes: · Off is the factory default setting. · Settings are duplicated in the PCL Emulation menu. HTML menu Menu item Font Name Albertus MT Antique Olive Apple Chancery Arial MT Avant Garde Bodoni Bookman Chicago Clarendon Cooper Black Copperplate Coronet Courier Eurostile Garamond Geneva Gill Sans Goudy Helvetica Hoefler Text Menu item Font Size 1­255 pt Intl CG Times Intl Courier Intl Univers Joanna MT Letter Gothic Lubalin Gothic Marigold MonaLisa Recut Monaco New CenturySbk New York Optima Oxford Palatino StempelGaramond Taffy Times TimesNewRoman Univers Zapf Chancery Description Sets the default font for HTML documents Note: The Times font will be used in HTML documents that do not specify a font. Description Sets the default font size for HTML documents Notes: · 12 pt is the factory default setting. · Font size can be increased in 1-point increments. 97 Menu item Scale 1­400% Description Scales the default font for HTML documents Notes: · 100% is the factory default setting. · Scaling can be increased in 1% increments. Orientation Portrait Landscape Margin Size 8­255 mm Sets the page orientation for HTML documents Note: Portrait is the factory default setting. Sets the page margin for HTML documents Notes: · 19 mm is the factory default setting. · Margin size can be increased in 1-mm increments. Backgrounds Do Not Print Print Specifies whether to print backgrounds on HTML documents Note: Print is the factory default setting. Image menu Menu item Auto Fit On Off Description Selects the optimal paper size, scaling, and orientation Notes: · On is the factory default setting. · The On setting overrides scaling and orientation settings for some images. Inverts bi-tonal monochrome images Notes: Invert On Off · Off is the factory default setting. · The font size can be increased in 1-point increments. · This setting does not apply to GIF or JPEG images. Scales the image to fit the selected paper size Notes: Scaling Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width Orientation Portrait Landscape Rev Portrait Rev Landscape · Best Fit is the factory default setting. · When Auto Fit is set to On, Scaling is automatically set to Best Fit. Sets the image orientation Note: Portrait is the factory default setting. 98 Security menu Menu item Max Invalid PIN Off 2­10 Description Limits the number of times an invalid PIN can be entered Notes: · Off is the factory default setting. · This menu item appears only if a printer hard disk is installed. · Once the limit is reached, the confidential print jobs for that user name are deleted. Limits the amount of time a confidential job stays in the printer before it is deleted Note: Off is the factory default setting. Job Expiration Off 1 hour 4 hours 24 hours 1 week Network/Ports menu TCP/IP menu Use the following menu items to view or set the TCP/IP information. Note: This menu is available only for network models or printers attached to print servers. Menu item TCP/IP View Hostname TCP/IP Address Netmask Gateway Description Shows the current TCP/IP hostname Lets you view or change the current TCP/IP address information Note: This is a four-field IP address. 99 Menu item TCP/IP Enable DHCP On Off Enable RARP On Off Enable BOOTP On Off AutoIP On Off Enable FTP/TFTP On Off HTTP Server Enabled On Off TCP/IP WINS Server Address DNS Server Address Description Lets you view or change the setting Note: On is the factory default setting. Lets you view or change the setting Note: This is a four-field IP address. IPv6 menu Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information. Note: This menu is available only for network models or printers attached to print servers. Menu item IPv6 Enable IPv6 Yes No IPv6 Auto Configuration On Off IPv6 View Hostname View Address View Router Address Description Enables IPv6 in the printer Note: Yes is the factory default setting. Enables the network adapter to accept the automatic IPv6 address configuration entries provided by a router Note: On is the factory default setting. Shows the setting 100 Menu item IPv6 Enable DHCPv6 Off On Description Enables DHCPv6 in the printer Note: Off is the factory default setting. Wireless menu Use the following menu items to view or configure the wireless internal print server settings. Note: This menu is available only for network models or printers attached to print servers when an optional wireless internal print server is installed in the printer. Menu item Mode Infrastructure Ad hoc Description Lets you select a mode Notes: · Infrastructure mode makes the printer wireless network accessible through an access point. · Ad hoc mode configures the printer for peer-to-peer wireless networking. Network Name <list of available network names> Lets you select an available network for the printer to use Standard Network and Network <x> menus Menu item PCL SmartSwitch On Off Description Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language Notes: · On is the factory default setting. [. . . ] Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances. Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark). For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web at www. lexmark. com/support. Remote technical support is provided for this product throughout its warranty period. [. . . ]