User manual LEXMARK E260D

[. . . ] Lexmark E260, E260d, and E260dn Series User's Guide May 2008 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. All other trademarks are the property of their respective owners. 740 West New Circle Road Lexington, Kentucky 40550 Contents Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Learning about the printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Finding information about the printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Printer configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Understanding the printer control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Additional printer setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Selecting a location for the printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Installing internal options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Accessing the system board to install internal options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Installing a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 64 is the international default setting. · The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page. Sets the printer to print on A4-size paper Notes: PCL Emulation Settings A4 Width 198 mm 203 mm · 198 mm is the factory default setting. · The 203-mm setting sets the width of the page to allow the printing of eighty 10-pitch characters. Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command Note: Off is the factory default setting. Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command Note: Off is the factory default setting. PCL Emulation Settings Auto CR after LF On Off PCL Emulation Settings Auto LF after CR On Off Understanding printer menus 84 Menu item Tray Renumber Assign MP Feeder Off None 0­199 Assign Tray <x> Off None 0­199 Assign Manual Paper Off None 0­199 Assign Man Env Off None 0­199 Tray Renumber View Factory Def None Tray Renumber Restore Defaults Yes No Description Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders Notes: · Off is the factory default setting. · None is not an available selection. It is displayed only when it is selected by the PCL 5 interpreter. · None ignores the Select Paper Feed command. · 0­199 allows a custom setting to be assigned. Displays the factory default setting assigned to each tray, drawer, or feeder Returns all tray, drawer, and feeder assignments to the factory default settings Network/Ports menu Network menu Menu item PCL SmartSwitch On Off Description Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language Notes: · On is the factory default setting. · When the Off setting is used, the printer does not examine incoming data. · When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off. Understanding printer menus 85 Menu item PS SmartSwitch On Off Description Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language Notes: · On is the factory default setting. · When the Off setting is used, the printer does not examine incoming data. · When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off. NPA Mode Off Auto Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: · Auto is the factory default setting. · Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. Network Buffer Disabled Auto 3K to <maximum size allowed> Sets the size of the network input buffer Notes: · Auto is the factory default setting. · The value can be changed in 1K increments. · The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. · To increase the maximum size range for the Network Buffer, disable or reduce the size of the parallel and USB buffers. · Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. Mac Binary PS On Off Auto Sets the printer to process Macintosh binary PostScript print jobs Notes: · Auto is the factory default setting. [. . . ] You may not decrypt the Software Program unless necessary for the legitimate Use of the Software Program. 9 ADDITIONAL SOFTWARE. This Software License Agreement applies to updates or supplements to the original Software Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement. 10 TERM. This Software License Agreement is effective unless terminated or rejected. You may reject or terminate this license at any time by destroying all copies of the Software Program, together with all modifications, documentation, and merged portions in any form, or as otherwise described herein. [. . . ]