User manual LEXMARK FORMS PRINTER 2481

[. . . ] Lexmark Forms Printer 2400 Series User's Guide Edition: June 2000 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. [. . . ] Select from the following: 3 4 6 8 Bottom Margin Set the bottom margin the number of lines you want. Eject by FF Eject by FormFeed determines how FormFeed is operated. When set to On, FormFeed is an eject operation for cut forms. When set to Off, FormFeed moves the paper to the next Top-Of-Form. 98 Macro options (continued) Use these menu When you want to customize. . . options Macro x Character options Defines the character settings for a macro. See "Character options" on page 96 for more information. Paper Handling options Defines the paper handling settings for a macro. See "Paper handling options" on pag e97 for more information. Copy Macro Lets you copy macro settings from one macro to another. Using Setup mode 99 Data menu options Data options Use these menu options Buffer When you want to . . . Select minimum to set the receive buffer size to zero. Select maximum for 2480/2481 printers to set the buffer size to 64KB or 96KB, depending on whether NLQ II (Near Letter Quality) Download is enabled. Using Setup mode Select maximum for 2490/2491 printers to set the buffer size to 47. 5KB or 79. 5KB depending on whether Download is enabled. Set to On, a line feed is performed for each Carrier Return (CR) received. Set to Off, a line feed does not occur when a CR code is received. Auto CR Requires a carrier return to occur. Set to On, a carrier return is performed for each line feed received. Set to Off, a carrier return does not occur when a line feed code is received. Zero Slash Turn Zero Slash On, to print a zero with a slash down the middle instead of a numeric zero. The factory setting of Zero Slash is Off. Download for NLQ II Note: Available for 2480/2481 printers only. Select Enable to reserve a portion of the receive buffer for downloading fonts. Select Disable to use the entire buffer as a receive buffer. Download Note: Available for 2490/2491 printers only. Select Enable to reserve a portion of the receive buffer for downloading fonts. [. . . ] 158 At a Lexmark designated location. When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product. Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, or damaged beyond repair. [. . . ]