User manual LEXMARK INTERPRET S400

[. . . ] To avoid injury, use caution when accessing this area for clearing a paper jam. CAUTION--POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. [. . . ] 17 If necessary, clear the "The key is provided for me automatically" check box. 18 In the Network Key box, type in a WEP key. 19 Write down the WEP key you chose so you can refer to it when running the wireless setup. Make sure you copy it down exactly, including any capital letters. 20 In the "Confirm network key" box, type the same WEP key. 21 Select This is a computer-to-computer (ad hoc) network; wireless access points are not used. 22 Click OK twice to close the two open windows. 23 It may take a few minutes for your computer to recognize the new settings. To check on the status of your network: a Right-click the Wireless Network Connections icon. b Select View Available Wireless Networks. · If the network is listed but the computer is not connected, select the ad hoc network and then click Connect. · If the network does not appear, wait a minute and then click Refresh network list. 24 Insert the installation software CD, and follow the directions for wireless installation. Note: Do not connect the installation or network cables until instructed to do so by the setup software. 25 When the available networks are displayed, provide the network name and the security information you created beginning in step 13. The installer will configure the printer for use with your computer. 26 Store a copy of your network name and security information in a safe place for future reference. In Windows 2000 · Refer to the documentation that came with your wireless network adapter for information on configuring an ad hoc network with Windows 2000. For Macintosh users 1 Access the Airport settings: In Mac OS X version 10. 5 a From the Apple menu, choose System Preferences. c Click AirPort. Networking 94 In Mac OS X version 10. 4 and earlier a From the Finder desktop, choose Go > Applications. b From the Applications folder, double-click Internet Connect. 2 From the Network menu, click Create Network. 3 Create a name for the ad hoc network, and then click OK. Note: Store the network name and password in a safe place for future reference. Adding a printer to an existing ad hoc wireless network Note: The printer can communicate on only one wireless network at a time. Configuring the printer for an ad hoc wireless network will remove it from any other wireless network, either ad hoc or infrastructure, for which it is configured. For Windows users 1 Click or Start. 2 Click All Programs or Programs, and then select the printer program folder from the list. 6 Follow the instructions on the computer screen. Note: Windows Vista computers may need to be reconnected to the ad hoc network after restarting. For Macintosh users 1 From the Finder desktop, double-click the printer folder. 2 Double-click Wireless Setup Assistant. 3 Follow the instructions on the computer screen. Configuring the printer wirelessly using WPS (Wi-Fi Protected Setup) Wi-Fi Protected Setup (WPS) is a method of configuring computers and printers on a secure wireless network. WPS is faster than manual configuration, and it reduces typing errors when new devices are added to a wireless network. The SSID and WPA passphrase are automatically detected and configured for you. [. . . ] Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Käesolevaga kinnitab Lexmark International, Inc. , et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen. [. . . ]