User manual LEXMARK MARKNET MARKNET INTERNAL PRINT SERVER QUICK START (1.58 MB)

[. . . ] In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. [. . . ] If your network is not using DHCP, then you must manually assign an IP address. One of the easiest ways is to use the printer operator panel. Press Menu until you see Network Menu, and then press Press Menu until you see Network Option 1 (or 2), and then press Select. Press Menu until you see Network 1 Setup (or 2), and then press Select. Press Menu until you see TCP/IP, and then press Select. Press Menu until you see Set IP Address (or Set IP Netmask or Set IP Gateway), and then press Select. B Press Select to move to the next segment. C Press Select again when you are finished. Use the printer operator panel to print a network setup page to verify your IP settings. Press Menu until you see Utilities, and then press Select. Press Menu until you see Print Net1 Setup (or Print Net2 Setup), and then press Select. Look under the TCP/IP heading on the network setup page to verify that your IP address, netmask, and gateway settings are non zero. After you have assigned and verified the TCP/IP settings, you are ready to configure the printer and set up your network clients to print to it. In Windows environments, your network printers can be configured for direct printing or for shared printing. Direct IP printing--when you want to print directly to a printer on your network Shared printing (point and print, and peer-to-peer)--when you need to centrally manage network printers Detailed information about using each of these printing methods is on the drivers CD. Click View Documentation and look for information about network printer installation. System drivers are built into Windows operating systems. Click View Documentation and look for information about network printer installation for your specific Windows environment. If you choose to install without using the instructions on the drivers CD, you need a basic understanding of network printing on TCP/IP networks, installing printer drivers, and the process involved in creating new network ports. Your printer connects automatically to AppleTalk networks and becomes readily visible to other network clients. X, you must create a printer object (icon) on the desktop of each network client using the LaserWriter 8 printer driver and the custom printer PPD file. For Mac OS X, select Add Printer to create a queue in the print center, using the PostScript Printer Module and the custom printer PPD file. [. . . ] This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. A declaration of conformity with the requirements of the Directive has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S. This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. [. . . ]