User manual LEXMARK N4000E PRINT SERVER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LEXMARK N4000E PRINT SERVER. We hope that this LEXMARK N4000E PRINT SERVER user guide will be useful to you.
Lastmanuals help download the user guide LEXMARK N4000E PRINT SERVER.
You may also download the following manuals related to this product:
LEXMARK N4000E PRINT SERVER SETUP SHEET (1.58 MB) (434 ko)
Manual abstract: user guide LEXMARK N4000E PRINT SERVER
Detailed instructions for use are in the User's Guide.
[. . . ] N4000e Print Server
User's Guide
September 2003
www. lexmark. com
Contents
Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chapter 2: Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connecting the hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: This light blinks to indicate a print job is processing.
USB (
Note: To locate the Power and USB indicator lights, see "Understanding the print server indicator lights. "
The Status indicator light is on
When this light is on, a firmware error has been detected. Power the print server off and back on again. If the light remains on, contact the Customer Support Center. Note: To locate the Status indicator light, see "Understanding the print server indicator lights. "
Troubleshooting 12
An error message appears
Message An error occurred while setting up your print server Your print server has been password protected Solution Contact the Customer Support Center. Launch your print server homepage on the Web to reset the password. To launch the homepage, right-click your print server in the list, and then select Launch homepage. Note: You must know the current password in order to reset it.
The Lexmark N4000e Setup Utility CD does not auto launch
1 Close all open software programs. 3 Reinsert the Lexmark N4000e Setup Utility CD.
If the setup utility screen appears, continue with step 11 on the Setup Sheet. If not, continue with the following steps: a b c d From your desktop, double-click My Computer. Continue with step 11 on the Setup Sheet.
I don't know which print server to select
If there are multiple print servers on your network, you can identify the one you are setting up by matching the MAC address
MAC address
to the twelve characters appended to the print server name in the list. For example, Lexmark_N4000e_0020000035D0.
An error message appears 13
My print server is not shown in the list
1 Select My print server/printer is NOT shown in the list. 2 Make sure:
· · · The power indicator light is on. The print server is properly connected to the network (check the Ethernet cable). There is not a problem with your network.
3 Select the first radio button. 4 Click Next to search the network again.
If the print server is now shown in the list, determine if it is configured. For help, see "Determine if my print server is configured. " If the print server is still not shown in the list, continue with the following steps.
5 Select Perform an advanced search. 8 Click Next.
You are returned to the Print Server Setup screen, where your print server should now appear in the list as configured.
My print server is not shown in the list 14
My printer is not shown in the list (No Printer Attached)
1 Select My print server/printer is NOT shown in the list on the Print Server Setup screen. 2 Make sure:
· · · The printer is turned on (check the power indicator light). The printer is properly connected to the print server (check the USB cable). There is not a problem with the printer or USB cable.
3 Select the first radio button. 4 Click Next to search the network again.
My print server is unconfigured
1 Select My print server/printer is shown in the list on the Print Server Setup screen. 4 Enter the IP Address and other network information. [. . . ] Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, or damaged beyond repair. Also, such product must be free of any legal obligation or restrictions that prevent its exchange. Before you present this product for warranty service, remove all programs, data, and removable storage media. For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, please contact Lexmark at 1-859-232-3000, or on the World Wide Web at http:// support. lexmark. com. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LEXMARK N4000E PRINT SERVER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual LEXMARK N4000E PRINT SERVER will begin.
