User manual LEXMARK N7000E

[. . . ] MarkNet N7000e Series Print Server Mac User's Guide January 2006 www. lexmark. com Edition: January 2006 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. [. . . ] 2 From the Safari menu, choose Preferences. 3 From either the Bookmarks Bar or Bookmarks Menu, choose Include Rendezvous or Include Bonjour. 4 Click Rendezvous or Bonjour, and then choose the name of your printer. 5 Make changes as necessary. Use a media drive If your print server has USB port(s), you can insert your media drives and print files. 1 Insert your media drive, and then press . and to navigate through a directory. 2 Scroll to the file using the navigation buttons. Use 3 When the file you want to print appears, press . Note: If your print server is a four-port model, scroll to the desired port. Note: Some file types may not be supported by the attached printer and therefore may not print. How Do I?. . . 11 Use the LCD features/options Several menus appear on the print server's LCD. These menus let you view and configure the print server settings. Reports menu Setup Page Purpose Prints a setup page with configuration information. Value If your model is a 7000e or a 7002e, it prints automatically when Setup Page is selected. If your print server is a 7020e, you must also select a port. Print Menus Prints a list of available print menus and their current settings. If your model is a 7000e or a 7002e, it prints automatically when Print Menu is selected. If your print server is a 7020e, you must also select a port. Network Card menu Card Status Purpose Displays whether the network card is connected or unconnected to the network. Displays the speed of the network connection. With dynamic addressing, a device can have a different IP address every time it connects to the network. This means that a new device can be added to a network without having to manually assign a unique IP address. Ethernet (category 5) cable--A network cable with RJ-45 connectors. This cable connects the print server to the Ethernet network. IP address--A number that identifies each device connected to the network (for example, 192. 168. 0. 1). MAC address--A 12-character identifier that is unique for each network hardware device (for example, 00. 02. 00. 10. 08. e8). network-capable printer--A printing device that does not need to be locally attached to a computer. When connected to a network, it can be accessed by any computer on the same network. [. . . ] This product satisfies the Class A limits of EN 55022 and safety requirements of EN 60950. Radio interference notice Warning: When a network cable is attached, this is a Class A product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take adequate measures. Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take adequate measures. Japanese VCCI notice 16 If this label appears on your product, the accompanying statement is applicable. Korean MIC statement Taiwan BSMI notice 17 If using any cable other than a network cable (Class B). . . Electronic emission notices Federal Communications Commission (FCC) compliance information statement The MarkNet N7000 Series Print Server has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]