User manual LEXMARK OPTRAIMAGE 242/232 (OCT 2000) OPTRAIMAGE 242/232 SETUP GUIDE (2.5 MB)

[. . . ] The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] Otherwise, SCAN EMAIL does not appear as a scan to network mode in the OptraImage control panel. OptraImage online documentation includes helpful instructions for making copies, sending faxes, and scanning documents to e-mail, FTP destinations, or back to your computer. To view the available information on the OptraImage CD, click View Documentation, and then Use OptraImage to browse the table of contents. Here are several ways to distribute OptraImage information: · Print copies of each set of user instructions stored on the OptraImage CD, and manually deliver them to users. Copy the PDFs containing the user instructions and store them in a convenient common location on your network or Intranet. Save the URL and send the link to your OptraImage users. OptraImage Job Accounting can be configured to require users to enter an authorized Job Account number or select an authorized Account name to unlock the control panel. Detailed instructions can be found on the OptraImage CD. Ready status message not displayed The control panel and the printer are not talking to each other, or the printer may be turned off. Make sure all cables and cords are connected, and then power up in the correct order. Control panel buttons not responding Scan unit isn't working Make sure the printer is turned on. Make sure all cables and cords are connected, and then power up in the correct order. 2 Make sure all cables and line cords are properly seated. 1 Make sure the telephone fax line cable is properly connected to the fax modem port on the print server and to the fax phone outlet. Scan to network modes must be configured in order to show up in the OptraImage control panel. If you need more help Launch the OptraImage CD, and then click Contact Lexmark for a complete list of phone numbers and web sites. 1 Turn off and disconnect the power to the scan unit. 3 Carefully pull out the jammed piece of paper. 5 Connect the power and turn the scan unit back on. Clean the scan unit if documents do not feed smoothly or easily, or if several documents feed at one time. The scan unit parts may be contaminated with ink, toner particles or paper coatings. 1 Wet a clean, lint-free cloth or cotton swab with isopropyl Moving the swab from side to side. [. . . ] La funzione Accounting dei processi OptraImage può richiedere l'immissione del numero di un account di processo o di un nome account autorizzato nel pannello di controllo. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model. [. . . ]