User manual LEXMARK P3150

[. . . ] Edition: July 2003 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] For more information about the Memory Card Manager (see page 23). Most digital cameras use a memory card to store photos. Insert the digital camera memory card into your AIO to access photos stored on the card. Then, save them to your computer using the software. The Lexmark Memory Card Manager (available on some models) gives you several options for transferring photos from your digital camera memory card to your computer's hard disk. Automatically save all photos to a My Pictures folder with today's Select not to save the images on the computer. Message screen each time a card is inserted. From a digital camera memory card (available on some models) 1 Insert your digital camera memory card into the corresponding memory card slot (see page 11). Note: Insert only one digital camera memory card at a time. Note: A small light on the memory card reader flashes and turns itself off when the digital camera memory card is properly inserted. The light blinks when the card is transferring data to or from the computer. Note: Use a black print cartridge for printing black and white text documents to conserve your photo print cartridge. 1 Depending on what you want to print, load the appropriate type of 2 Make sure you select the paper size for your document (see step 8 Click it, and then follow the instructions on the computer screen; otherwise, click Close at the bottom of the menu. 7 From the Quality/Copies tab, select the quality, speed, paper type, To see details about a setting, right-click a setting on the screen, and then select the What's This?To see details about a setting, right-click a setting on the screen, and then select the What's This?To see details about a setting, right-click a setting on the screen, and then select the What's This?10 Once you have applied all the settings you want in Print Properties, Click OK at the bottom of the screen to return to the Print dialog box. The following steps show you how to scan and save images. 8 If you are sending the scanned image to a software program, click scan Now to complete the scan. If you are using the Creative Tasks section, follow the instructions on the computer screen. To make a quick copy, press Black or Photo/Color copy on the control panel. To make black and white, gray, or color copies: Copy Now Click to copy your image. [. . . ] Paper jam Cover open Ink Low Paper out Cartridge error If the AIO software is not functioning properly or a communications error message displays when you try to use the AIO, you may need to remove and then reinstall the AIO software. Note: If USB port is not listed, you need to remove and then reinstall the AIO software (see page 53). Lexmark 3100 Series is not the default printer, right-click the printer icon, and then click Set as Default. If the preceding solutions do not solve the problem with your All-In-One: Federal Communications Commission (FCC) compliance information statement The Lexmark 3100 Series 4477-001/4478-001 has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]