User manual LEXMARK P350

[. . . ] 350 Series User's Guide July 2006 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. All other trademarks are the property of their respective owners. 740 West New Circle Road Lexington, Kentucky 40550 Safety information Use only the power supply and power supply cord provided with this product or the manufacturer's authorized replacement power supply and power supply cord. Connect the power supply cord to an electrical outlet that is near the product and easily accessible. [. . . ] For more information, see "Using the PictBridge menu" on page 16. Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing. Printing photos 29 Editing photos You can use the following paper types with your printer: · Lexmark Perfectfinish Photo Paper · Lexmark Photo Paper · Photo/glossy paper Notes: · For best results, use Lexmark Perfectfinish Photo Paper or Lexmark Photo Paper. · Do not use Lexmark Premium Photo Paper. Your print cartridge is not compatible with this type of paper. Cropping photos 1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper. ) For more information, see "Loading paper" on page 19. 2 Insert a memory card or flash drive. For more information, see "Inserting a memory card" on page 20 or "Inserting a flash drive" on page 21. 3 Press 4 Press 5 Press 6 Press 7 Press 8 Press 9 Press 10 Press tool. or . repeatedly until View and Select appears on the display. to continue. or to navigate through the photos. to select a photo for printing. or to select the tool and or to use the selected repeatedly until Crop appears at the bottom of the display, and the crop icon is highlighted. 11 Use the cropping tools shown on the display. Press 12 Press 13 Press 14 Press to save your changes and go back to the Photo Edit Mode menu. to go back to the photo selection screen. or to select the number of copies to print. when the image is Note: Pressing when the number of copies is set to 1 will deselect the image. Pressing not selected will select the image. 15 You can select more photos for printing and editing by repeating step 6 through step 14. 16 Press to go to the Print Preview screen. 17 If you want to adjust the print settings: a Press . b Make your selections. Editing photos 30 c Press 18 Press to save your selections, and then go back to the Print Preview screen. to print. Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing. Adjusting the brightness of photos 1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper. ) For more information, see "Loading paper" on page 19. 2 Insert a memory card or flash drive. For more information, see "Inserting a memory card" on page 20 or "Inserting a flash drive" on page 21. 3 Press 4 Press 5 Press 6 Press 7 Press 8 Press 9 Press 10 Press 11 Press 12 Press or . repeatedly until View and Select appears on the display. to continue. or to navigate through the photos. to select a photo for printing. or or repeatedly until Brightness appears on the display. to adjust the brightness of the photo. Note: The image on the display does not accurately reflect the image when printed. [. . . ] You are responsible for loss of, or damage to, a product in transit to the Remarketer or the designated location. When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The replacement item assumes the remaining warranty period of the original product. [. . . ]