User manual LEXMARK PRESTIGE PRO800

[. . . ] Do not place or use this product near water or wet locations. Use only the power supply and power cord provided with this product or the manufacturer's authorized replacements. CAUTION--SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports. This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. [. . . ] Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless connection. Using the printer over an Ethernet network Select the connection type that describes how you currently access your printer: If the printer is currently set up for wireless 1 Plug an Ethernet cable into the printer and to an available port on a switch or wall jack. 2 Wait for a minute for the Ethernet network interface to become active and acquire an IP address from the network. 3 Add the printer (see "Add the printer" on page 90). Remove the wireless queue if you do not want to switch back to accessing the printer over a wireless network. If the printer is currently set up locally (using USB connection) 1 Plug an Ethernet cable into the printer and to an available port on a switch or wall jack. 2 Insert the software and installation CD into the computer you want to use to configure the printer. 3 Follow the instructions on the computer screen for configuring a printer on an Ethernet network. Note: You will need a USB cable to complete the configuration. Networking 89 Add the printer In Mac OS X version 10. 5 1 From the Apple menu, choose System Preferences. 2 Click Print & Fax under the Hardware section. 4 Select the printer from the list and click Add. In Mac OS X version 10. 4 or earlier 1 From the Finder desktop, choose Go > Utilities. 2 Double-click Print Center or Printer Setup Utility, depending on the operating system version you are using. The Printer List dialog appears. 3 Choose the printer you want to use. 4 Click Add. The Printer Browser appears. 5 Select your printer. 6 Click Add. Sharing a printer in a Windows environment 1 Prepare the computers to share the printer: a Make all computers printing to the printer accessible through Network Neighborhood by enabling File and Print Sharing. See the Windows documentation for instructions on enabling File and Print Sharing. b Install the printer software on all computers that will print to the printer. 2 Identify the printer: a On the computer that is attached to the printer, do one of the following: 1 Click , or click Start and then click Run. 2 In the Start Search or Run box, type control printers. 3 Press Enter, or click OK. The printer folder opens. b c d e Right-click the name of your printer. From the Sharing tab, select Share this printer or Shared as, and then assign a distinctive name. Click OK. 3 Locate the printer from the remote computer: Note: The remote computer is the one that is not attached to the printer. a Do one of the following: 1 Click , or click Start and then click Run. 2 In the Start Search or Run box, type control printers. Networking 90 3 Press Enter, or click OK. The printer folder opens. b c d e f Right-click the name of your printer. Click the Ports tab, and then click Add Port. Select Local Port, and then click New Port. [. . . ] Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Käesolevaga kinnitab Lexmark International, Inc. , et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen. [. . . ]