User manual LEXMARK PROSPECT PRO200

[. . . ] The manufacturer is not responsible for the use of other replacement parts. CAUTION--POTENTIAL INJURY: The area behind the duplex cover has protruding ribs as part of the paper path. To avoid injury, use caution when accessing this area for clearing a paper jam. CAUTION--POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. [. . . ] 5 Click Set up a connection or network when you are prompted to select a network to connect to. 6 Click Set up a wireless ad-hoc (computer-to-computer) network, when you are prompted to choose a connection option, and then click Next. 7 Follow the instructions for setting up a wireless ad hoc network. As part of the setup: a Create a network name or SSID for the network between the computer and your printer. Be sure to use the exact spelling and capitalization. c Go to the Security Type list, select WPA2-Personal or WEP, and then create a WPA passphrase or WEP key. Networking 94 WPA passphrases must be: · From 8 to 63 ASCII characters. ASCII characters in a WPA passphrase are case-sensitive. or · Exactly 64 hexadecimal characters. Hexadecimal characters are A-F, a-f, and 0-9. WEP keys must be: · Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A-F, a­f, and 0-9. or · Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard d Write down the password for your network. Be sure to use the exact spelling and capitalization. Windows Vista will enable the ad hoc network for you. It will appear in the "Connect to a network" dialog under "Available networks, " indicating that the computer is configured for the ad hoc network. 8 Close the Windows Control Panel and any remaining windows. 9 Insert the installation software CD, and follow the directions for wireless installation. Note: Do not connect the installation or network cables until instructed to do so by the setup software. 10 When the available networks are displayed, provide the network name and the security information you created in step 7. The installer will configure the printer for use with your computer. 11 Store a copy of your network name and security information in a safe place for future reference. Note: You may need to reconnect Windows Vista computers to the ad hoc network after restarting. In Windows XP 1 Click Start. 3 Click Network and Internet Connections. 5 Right-click the icon for your wireless network connection. 6 Click Enable, if it appears in the pop-up menu. Note: If Disable appears, your wireless connection is already enabled. 7 Right-click the Wireless Network Connection icon. 9 Click the Wireless Networks tab. Note: If the Wireless Networks tab does not appear, your computer has third-party software that controls your wireless settings. You must use that software to set up the ad hoc wireless network. For more information, see the documentation for the third-party software to learn how to create an ad hoc network. 10 Select the Use Windows to configure my wireless network settings check box. 11 Under Preferred Networks, delete any existing networks. b Click Remove to delete the network from the list. Networking 95 12 Click Add to create an ad hoc network. 13 In the Network Name (SSID) box, type the name you want to give your wireless network. [. . . ] Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Käesolevaga kinnitab Lexmark International, Inc. , et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen. [. . . ]