User manual LEXMARK T430

[. . . ] Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. Edition: March 2004 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESS OR IMPLIED , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. [. . . ] Many personal computers activate the INIT signal each time the computer is turned on and off. Printer processes raw binary PostScript print jobs from computers using the Macintosh operating system. Printer processes print jobs from computers using either Windows or Macintosh operating systems. To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol. Purpose To configure the size of the parallel input buffer. Any jobs already buffered on the disk are printed before normal processing of incoming jobs resumes. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Parallel Buffer size, disable or reduce the size of the serial, and USB buffers. PCL emulation when a print job received through the parallel port requires it, regardless of the default printer language. PostScript emulation when a print job received through the parallel port requires it, regardless of the default printer language. Use the Network Menu to change printer settings affecting jobs sent to the printer through a network port (either Standard Network or Network Opt <x>). Note: Values marked by an asterisk (*) are the factory default settings. menu item Purpose To configure the printer to process Macintosh binary PostScript print jobs. Values On Printer processes raw binary PostScript print jobs from computers using the Macintosh operating system. note: This setting often causes Windows print jobs to fail. Off Auto* Printer filters PostScript print jobs using standard protocol. Printer processes print jobs from computers using either Windows or Macintosh operating systems. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Network Buffer size, disable or reduce the size of the parallel, serial, and USB buffers. Purpose To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol. PCL emulation when a print job received through the network port requires it, regardless of the default printer language. PostScript emulation when a print job received through the network port requires it, regardless of the default printer language. [. . . ] This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S. This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950. The following table documents the power consumption characteristics of the printer. [. . . ]