User manual LEXMARK X1100

[. . . ] X1100 Series All-In-One User's Guide · Learning about the All-In-One · Understanding the software · Using the All-In-One · Maintenance · Troubleshooting www. lexmark. com Edition: May 2003 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. [. . . ] item. Quality/Speed settings Copy settings 11 8 From the Paper Setup tab, select the paper type, paper size, and orientation. To see details about a setting, right-click a setting on the screen, and then select the What's This?item. Paper type setting Paper size setting Orientation setting 9 From the Print Layout tab, select the layout and duplexing settings for the type of document you are printing. To see details about a setting, right-click a setting on the screen, and then select the What's This?item. Layout setting Duplexing setting 10 Once you have applied all the settings you want in Print Properties, click OK at the bottom of the screen to return to the Print dialog box. 11 Click Print to complete your task. 12 Scanning The following steps show you how to scan and save images. 1 Open the top cover of the All-In-One. 2 Place the item you want to scan face down on the glass. Make sure the upper left corner of the front of the item aligns with the arrow. 3 Close the top cover. 4 Open the Lexmark All-In-One Center (see page 3). The All-In-One Main Page displays. 5 Click the Preview Now button located in the upper right corner of the All-In-One Main Page. An image of the scanned item displays in the preview section. 6 Click and drag to select a specific area of the preview image to scan. 7 Click See More Scan Settings to review and change the scan settings. 8 Select your scan settings. 13 From the Send scanned image to: drop-down menu, select a program to send the scanned image to, or click the Creative Tasks section to display a list of projects. Preview Now button Click to see a preview of the image. Scan Now button Click to scan the item on the scanner bed. Scan settings Adjust the settings for the scanned item. Preview section See a preview of the image, and select an area to be scanned. 9 If you are sending the scanned image to a software program, click Scan Now to complete the scan. If you are using the Creative Tasks section, follow the instructions on the computer screen. For a list of the Creative Tasks available from the All-In-One Main Page, see page 4. Copying Note: You can make a quick color or black and white copy. Press Color Copy or Black Copy on the control panel. To make black and white, gray, or color copies: 1 Open the top cover of the All-In-One. 14 2 Place the item you want to copy face down on the glass. Make sure the upper left corner of the front of the item aligns with the arrow. 3 Close the top cover. 4 Open the Lexmark All-In-One Center (see page 3). The All-In-One Main Page displays. 5 Click See More Copy Settings to review and change the copy settings. The All-In-One Copy section expands: Preview Now button Click to see a preview of the image. Copy Now button Click to copy your image. Copy settings Adjust the settings for the copy. Preview section See a preview of the image, and select an area to be copied. 6 Select your copy settings. Note: You may want to reduce or enlarge the image. 7 Click Copy Now. 15 Faxing The following steps lead you through sending a fax using the computer modem. 1 Open the top cover. 2 Place the item you want to fax face down on the glass. [. . . ] The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. [. . . ]