User manual LEXMARK X204N

[. . . ] Do not place or use this product near water or wet locations. CAUTION--POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. [. . . ] · When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting. · Print Timeout is available only when using PCL or PPDS emulation. This setting has no effect on PostScript emulation print jobs. Timeouts Wait Timeout Disabled 15­65535 Sets the amount of time in seconds the printer waits for additional data before canceling a print job Notes: · 40 seconds is the factory default setting. · Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL or PPDS emulation print jobs. Factory Defaults Do Not Restore Restore Now Returns the printer settings to the factory default settings Notes: · Do Not Restore is the factory default setting. Do Not Restore keeps the user-defined settings. · Restore returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in RAM are deleted. Copy Settings menu Menu item Content Text Text/Photo Photograph Description Specifies the type of content contained in the copy job Notes: · Text emphasizes sharp, black, high-resolution text against a clean, white background. · Text/Photo is the factory default setting. Text/Photo is used when the original documents are a mixture of text and graphics or pictures. · Photograph tells the scanner to pay extra attention to graphics and pictures. This setting increases the time it takes to scan, but emphasizes a reproduction of the full dynamic range of tones in the original document. This increases the amount of information saved. Understanding printer menus 95 Menu item Paper Saver Off 2 on 1 Portrait 2 on 1 Landscape 4 on 1 Portrait 4 on 1 Landscape Print Page Borders On Off Collate On Off Original Size Letter Legal Executive Folio Statement Universal ID Card Custom Scan Size 4 x 6 in. Business Card A4 A5 Oficio (Mexico) JIS B5 Paper Source Tray <x> Manual Feeder Darkness -4 to +4 Number of Copies 1­999 Background Removal -4 to +4 Contrast 0­5 Best for content Shadow Detail -4 to +4 Description Sets two or four sheets of an original document together on the same page Note: Off is the factory default setting. Specifies whether a border is printed around the edge of the page at the margins Note: Off is the factory default setting. Keeps the pages of a print job stacked in sequence when making multiple copies of the job Note: On is the factory default setting. Specifies the paper size of the original document Notes: · Letter is the US factory default setting. A4 is the international factory default setting. · A setting with an * indicates it is the current default setting. Specifies the paper source for copy jobs Note: Tray 1 is the factory default setting. Specifies the level of darkness for the copy job Note: The factory default setting is 0. Specifies the number of copies for the copy job Note: The factory default setting is 1. Adjusts the amount of background visible on a copy Note: The factory default setting is 0. Specifies the contrast used for the copy job Note: "Best for content" is the factory default setting. Adjusts the amount of shadow detail visible on a copy Note: 0 is the factory default setting. Understanding printer menus 96 Menu item Scan edge to edge On Off Sharpness 1­5 Description Specifies if the original document is scanned edge-to-edge prior to copying Note: Off is the factory default setting. Adjusts the sharpness of a copy Note: 3 is the factory default setting. Fax Settings menu General Fax Settings Menu item Station Name Station Number Station ID Station Name Station Number Enable Manual Fax On Off Description Specifies the fax station name of the printer Specifies a fax number associated with the printer Specifies how the printer is identified Sets the printer to fax manually only, which requires a line splitter and a telephone hand set Notes: · Off is the factory default setting. · Use a regular telephone to answer an incoming fax job and to dial a fax number. · Touch # 0 on the numeric keypad to go directly to the Manual Fax function. Cancel Faxes Allow Don't Allow Caller ID FSK DTMF Specifies whether the printer may cancel fax jobs Note: If Cancel Faxes is not enabled, it will not appear as an option. [. . . ] Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Käesolevaga kinnitab Lexmark International, Inc. , et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen. [. . . ]