User manual LEXMARK X215

[. . . ] X215 MFP User's Guide April 2003 www. lexmark. com Edition: April 2003 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. [. . . ] 4 Using the numeric keypad, enter the number of the fax machine to which you want to send your document. Note: You may enter a number using shortcuts or groups. For help, see page 58. 5 When you hear a high-pitched fax signal, indicating a connection with the receiving fax machine, press Start. Note: Pressing Stop/Clear cancels the faxing process. Receiving a fax automatically Your machine is preset to receive faxes automatically. If you want to change the default setting to manual, see "Receiving a fax manually" on page 53. When the Receive Mode is set to Automatic, your machine answers an incoming fax on a specified number of rings. Once the connection is established, the machine automatically receives the fax. Note: To change the number of rings before the machine answers or to adjust the ringer volume, see "Customizing settings" on page 54. Receiving a fax manually 1 Select the Manual Receive Mode setting on the operator panel menu. a b c d e Press Menu. Press a scroll button ( or ) until FAX SETUP appears on the top line of the display, and then press Select. Press a scroll button until Receive Mode appears on the bottom line of the display, and then press Select. Scroll to the Manual setting, and then press Select. To return to the Ready prompt, press Stop/Clear. 2 When the ringer sounds, press the telephone icon button. 3 If you hear a high-pitched fax signal, press Start. The machine begins receiving the fax, and returns to a Ready prompt when finished. Receiving a fax automatically 53 Customizing settings You can modify all the fax options using the operator panel menu. (See the following table for the available options. )The Resolution option can be modified from either the operator panel menu or by pressing the Resolution button. Settings selected using the operator panel menu become the default settings and are in effect for all fax jobs. Settings selected using the Resolution button remain in effect until a predefined Timeout period is expired. To change the Timeout period, see page 48. To modify the Resolution setting for the current fax job, press Resolution repeatedly until the setting you want appears on the display, and then press Select. Note: See the table below for the recommended setting to select. To modify all other fax options or to make your Resolution selection the default setting: 1 Press Menu. 2 Press a scroll button ( or ) until FAX SETUP appears on the top line of the display, and then press Select. 3 Press a scroll button to scroll through the fax setup options. 4 When the option you want to change appears, press Select. [. . . ] If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. [. . . ]