User manual LEXMARK X3580

[. . . ] 3500-4500 Series User's Guide March 2007 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. All other trademarks are the property of their respective owners. 740 West New Circle Road Lexington, Kentucky 40550 Important safety information Use only the power supply and power supply cord provided with this product or the manufacturer's authorized replacement power supply and power supply cord. Connect the power supply cord to a properly grounded electrical outlet that is near the product and easily accessible. [. . . ] or repeatedly until Print Photos appears. 6 Press Start Color or Start Black. Using a PictBridge-enabled digital camera to control printing photos You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print photos. 1 Insert one end of the USB cable into the camera. Note: Use only the USB cable that came with the digital camera. 2 Insert the other end of the cable into the PictBridge port on the front of the printer. Warning: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively printing from a PictBridge-enabled digital camera. Also, do not remove the USB cable or network adapter while actively printing from a PictBridge-enabled digital camera. 52 Notes: · Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see the camera documentation. · The printer recognizes one active media device at a time. If you insert more than one media device, a message appears on the display prompting you to designate the device you want the printer to recognize. · If you have a memory card inserted when you connect a PictBridge-enabled camera, an error message will be displayed telling the you to remove one of the devices. · If the PictBridge connection is successful, the following appears on the printer display: PictBridge camera detected. If any other message appears, see "Error · Values selected within the menu items are the settings used for Pictbridge printing if no explicit selection is 3 Follow the instructions in the camera documentation to select and print photos. Note: If the printer is turned off while the camera is connected, you must disconnect and then reconnect the camera. Printing photos using the computer Note: To print photos or images from a Web page, see "Printing photos or images from a Web page" on page 40. Viewing / Printing photos from the Photo Library 1 From the desktop, double-click the Lexmark Imaging Studio icon. 3 Click to select the photo(s) you want to print. 4 From the Imaging Studio taskbar located at the bottom of the screen, click Photo Prints. 5 From the Quality drop-down list, select a copy quality. 6 From the Paper Size in Printer drop-down list, select the paper size. 7 To select multiple prints of a photo, or to select photo sizes other than 4 x 6 in. (10 x 15 cm), select the options you want in the table. Use the drop-down list in the last column to view and select other sizes. 8 Click Print Now in the bottom right corner of the screen. 53 Printing photos from a media device using the computer 1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper. ) For more information, see "Loading paper" on page 34. 2 Insert a CD or media device into the computer. a If you are using Windows XP or Windows Vista, a "What do you want Windows to do?" screen appears. Click Transfer Photos to your computer using the Lexmark Imaging Studio. b If you are using Windows 2000: 1 From the desktop, double-click the Lexmark Imaging Studio icon. 5 To print selected photos, click Deselect All. 6 Click to select the photo(s) you want to print. 8 From the Quality drop-down list, select a copy quality. 9 From the Paper Size in Printer drop-down list, select the paper size. 10 To select multiple prints of a photo, or to select photo sizes other than 4 x 6 in. (10 x 15 cm), select the options you want in the table. Use the drop-down list in the last column to view and select other sizes. 11 Click Print Now in the bottom right corner of the screen. 12 Remove the CD or media device. Printing Photo Packages 1 From the desktop, double-click the Lexmark Imaging Studio icon. [. . . ] Note: Some modes may not apply to your product. Mode Printing Copying Scanning Ready Power Saver High Off Description The product is generating hard-copy output from electronic inputs. The product is generating hard-copy output from hard-copy original documents. The product is scanning hard-copy documents. [. . . ]