User manual LEXMARK X646EF

[. . . ] X646ef Menus and Messages Guide February 2006 www. lexmark. com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc. , registered in the United States and/or other countries. 740 West New Circle Road Lexington, Kentucky 40550 Edition: February 2006 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. , PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. [. . . ] The binding is along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation). See Duplex Bind on page 77 for more information. A 5 setting gives a smaller file size, but the quality of the image is lessened. A 90 setting gives the best quality of the image, but the file size is very large. A 5 setting gives a smaller file size, but the quality of the image is lessened. A 90 setting gives the best quality of the image, but the file size is very large. One single TIFF file is created for each page. Clear the check box to turn it off. Short edge Photo JPEG Quality Sets the quality of a JPEG photo image in relation to file size and the quality of the image. This menu item applies to all scan functions. Sets the quality of a JPEG text or text/photo image in relation to file size and the quality of the image. This menu item applies to Text, Text/Photo, and all scan functions. Provides a choice between single-page TIFF files and multiplepage TIFF files. For a multiple-page scan to FTP job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job. This menu item applies to all scan functions. Enables the Text/Photo mode to have smaller file sizes by using 1 bit images when Color is set to Off. 5­90 (50%*) JPEG Quality 5­90 (75%*) Use multi-page TIFF Yes* No Scan Bit Depth 1 bit* 8 bit Settings 75 Using the MFP menus Menu item Base file name Purpose Values and descriptions text entry The default value is the following word: image Note: There is a 53-character limit for the base file name. The following characters or symbols are invalid: * ­ asterisk : ­ colon ?­ question mark < ­ less than symbol > ­ greater than symbol | ­ vertical bar A time stamp is added to the end of the base file name. To set to Off, clear the check box. Custom Job scanning Allows for scanning of custom scan to USB jobs. Custom Job is not supported on all models. Adjusts the amount of background visible on a copy. Specifies the contrast used for the scan to USB job. The default is dependent on the Content menu item. [. . . ] 119 234. yy Paper jam, check [area name]. 119 235. yy Paper jam, check [area name]. 119 236. yy Paper jam, check [area name]. 119 237. yy Paper jam, check [area name]. [. . . ]