User manual LEXMARK Z65

[. . . ] Click the blue text to link to other parts of this Online User's Guide. â· Click the arrows at the bottom of the screen to move forward and backward through the pages. 2 In the Find What: box, type the word or phrase you want to search for. 2 Choose Print, specify the pages you want to print, and then click Print. [. . . ] This ensures you do not waste iron-on transfers perfecting the image you would like to print. When the image prints to your satisfaction, load the iron-on transfers. Note: Do not push the iron-on transfers too far into the printer. If your transfers came with instructions, read them Make sure your transfers are not used or damaged. Load the iron-on transfers vertically against the Squeeze and slide the paper guide to the left edge of the iron-on transfers. 1 Choose a paper size: a From the software application File menu, choose Page 2 Choose a print quality, paper tray, and paper type: a From the software application File menu, choose Print. B From the pop-up menu in the upper left, choose Paper Type/Quality. Note: If you choose Printer Setting you must press the paper tray 1 button on the printer. Note: To prevent smudging, remove each iron-on transfer as it exits the printer and let it dry before stacking. You can also use the Wait for pages to dry function. You can load up to 10 transparencies in paper tray 1, depending on the thickness of the transparencies. Make sure you separate the paper from the transparencies before you load them. Make sure your transparencies are not used or damaged. â· If your transparencies came with instructions, read them carefully. â· Make sure the rough (print) side of the transparencies is facing you. if the Transparencies have a removable strip, make sure each strip faces away from you and down. Load the transparencies vertically against the right side of paper tray 1. Note: Do not push the transparencies too far into the printer. Squeeze and slide the paper guide to the left edge of the transparencies. 1 Choose a paper size: a From the software application File menu, choose Page Setup. 2 Choose a paper type, print quality, and paper tray: a From the software application File menu, choose Print. b Choose a paper source: Tray 1 or Printer Setting. [. . . ] You completely removed the transparent tape and sticker from the back and bottom of You loaded the paper correctly and did not push the paper too far into the printer. If you are connected to a network with a Lexmark adapter, the indicator lights are on. If you are using a Lexmark Z65n make sure the network lights on the back of the printer are on. For more information, see Network connection speed light. [. . . ]