User manual LG 1467

[. . . ] Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer LCD Monitor User Guide Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. [. . . ] We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products. For more information and help when recycling, please go to this website: http://global. acer. com/about/sustainability32. htm Visit www. global. acer. com for further information on the features and benefits of our other products. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://global. acer. com/about/sustainability. htm vii Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display:lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www. eiae. org. For lamp-specific disposal information, check www. lamprecycle. org. LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. ENERGY STAR (for selected models) is a government program (public/private partnership) that gives people the power to protect the environment in a cost effective way and without sacrificing quality or product features. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the US Environmental Protection Agency (EPA) and the US Department of Energy (DOE). In the average home, 75% of all electricity used to power home electronics is consumed while the products are turned off. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. English Caution: Ensure that all screws are properly tightened before standing the monitor up on the stand, otherwise you risk causing irreparable damage to the monitor. 1 2 Attach the the arm of the monitor stand to the base. Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin. Note: Take care when performing the installation to avoid injuring yourself. 4 English Screen position adjustment To optimize the viewing position, you can adjust the monitor tilt, using both of your hands to hold the edges of the monitor. The monitor can be adjusted to 15 degrees up or 5 degrees down. 5° 15° Connecting the power cord · Check first to make sure that the power cord you use is the correct type required for your area. The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. Plug one end of the power cord to the AC inlet, and plug the other end into an AC outlet. For units using 120 V AC: Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V. For units using 220/240 V AC: Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. · · · · Power saving The monitor will be switched to "power saving" mode by the control signal from the display controller, as indicated by the amber-colored power LED. Mode On Power saving LED light White Amber The power saving mode will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from "power saving" mode back to "on" is around 3 seconds. 5 Connecting the docking device (for selected models) English Locate the docking device connector on the rear panel and connect it to the dock. Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. [. . . ] Enhances colors and emphasizes fine detail. Pictures and photographs appear in vibrant colors with sharp detail. Presents great visuals, even in unsuitably-lit environments. Standard mode Graphic mode Movie mode 11 Adjusting the OSD settings Note: The following content is for general reference only. The OSD can be used for adjusting the settings of your LCD Monitor. [. . . ]