User manual LG 1468

[. . . ] If shipped to USA/Canada, install only a UL LISTED/CSA LABELLED power supply cord meeting the following specifications: SPECIFICATIONS Plug Type Nema-Plug 5-15p Cord Type SVT or SJT, minimum 3 × 18 AWG Length Maximum 15 feet Rating Minimum 7 A, 125 V WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the unit. Refer servicing to qualified personnel only. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] 4 2 Press the M/m buttons to select (PICTURE ADJUSTMENT) and press the OK button. The PICTURE ADJUSTMENT menu appears on the screen. Press the M/m buttons to select "Contrast" and press the OK button. The "Contrast" adjustment menu appears on the screen. Press the M/m buttons to adjust the contrast. 3 4 13 Fine tuning the color temperature The setting is stored in memory for INPUT1, INPUT2 (DVI-D), and INPUT2 (HD15), respectively. R: G: B: 110 128 140 x Selecting the Smoothing If the picture displayed at the "Full2" or "Full1" mode of "Zoom" is not smooth, use the picture smoothing function. PICTURE ADJUSTMENT Backlight : Contrast : Brightness : Color : Gamma : Smoothing : 100 50 50 9300K Gamma2 Text Standard Graphics 1600 × 1200/60 Hz Select Set OK 1: HD15 1 Press the MENU button. Press the M/m buttons to select (PICTURE ADJUSTMENT) and press the OK button. The PICTURE ADJUSTMENT menu appears on the screen. Press the M/m buttons to select "Color" and press the OK button. The options are displayed on the popup menu. Press the M/m buttons to select "Adjust" and press the OK button. The fine tuning menu for color temperature appears on the screen. This adjustment is effective when the computer is connected to the monitor's HD15 input connector (analog RGB). Start the Utility Disk and display the test pattern. For Windows Click [Utility] t [Windows]/[Win Utility. exe]. For Macintosh Click [Utility] t [Mac]/[Mac Utility]. Press the M/m buttons to select (INPUT SETTING) and press the OK button. The INPUT SETTING menu appears on the screen. Press the M/m buttons to select "Phase" and press the OK button. The "Phase" adjustment menu appears on the screen. Press the M/m buttons until the horizontal stripes are at a minimum. Adjust so that the horizontal stripes are at a minimum. Exit MENU x Adjusting Picture Position and Sharpness (analog RGB signal only) Note When receiving digital RGB signals from the DVI-D input connector for INPUT2, adjustment is unnecessary. 3 4 Automatic picture quality adjustment function When the monitor receives an input signal, it automatically adjusts the picture's position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 19). Note While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate. [. . . ] Monitor buttons do not operate ( appears on the screen). Resolution displayed on the menu screen is incorrect. After turnig off the main power, the 1 (power) indicator stays bright for a while. · Adjust the pitch and phase (analog RGB signal only) (page 15). · Adjust the pitch and phase (analog RGB signal only) (page 15). [. . . ]