User manual LG 22MA31D-PZ

[. . . ] Visit divx. com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. com for more information on how to complete your registration. [. . . ] Press the SETTINGS button on yy the remote control. NETWORK → Network connection to connect to an available network automatically. Follow the prompts on the projector. 1 Select a network connection, either 2 When connecting via Wi-Fi, use Item AP List Description Connects to the network selected from the AP List. the one of the following network connection methods. Enter the Connects to the wireless SSID AP typed in. WPSPBC Connects easily when the button of a wireless AP supporting PBC is pressed. WPS-PIN Connects easily when the PIN of the wireless AP that you wish to connect to is entered in to the AP website. 30 ENTERTAINMENT To use the Wi-Fi Direct function Wi-Fi Direct is a function that allows your projector to connect with a Wi-Fi Direct device without Internet connection. With SmartShare™, you can watch the files stored on a device connected via Wi-Fi Direct. Press the SETTINGS button on the yy remote control. use it, please change it to Off. ) 2 Enable the Miracast™/Intel’s WiDi 3 A list of devices that can be connected to the projector is displayed. settings on the device that you want to connect to. 4 Select a device to connect. 5 Select Yes, when the connection 6 If the device that you want to connect request message appears. accepts the request, Miracast™/ Intel’s WiDi is connected. When Wi-Fi Direct is set to Off, if yy you set Miracast™/Intel’s WiDi to On, Wi-Fi Direct is automatically set to On. If yy you do not turn off the entire local home network, network traffic may occur on some devices. For yy an AP connection, an access point device that supports wireless connection is required and the wireless connection feature must be enabled on the device. Contact your service provider regarding availability of wireless connection on your access point. Check the SSID and security settings yy of the AP for AP connection. Refer to the appropriate documentation for SSID and security settings of the AP. Invalid settings on network devices yy (wired/wireless line sharer, hub) can cause the projector to run slowly or not operate properly. Install the devices correctly according to the appropriate manual and set the network. Connection method may differ yy according to the AP manufacturer. 32 SMARTSHARE SMARTSHARE Before Using Connecting a USB Device Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below. Removing a USB Device 1 Click the Q. MENU button. 2 Use the or button to move 3 Select a USB to remove. [. . . ] You can also use the HDMI IN 2 (MHL). Macintosh Adjust the control panel to enable mirroring after start-up. * Optional  Extras 66 CONNECTING DEVICES Using the mirroring function of a mobile phone MHL Connection The Mobile High-definition Link (MHL) is an interface that can connect a mobile phone to the projector and play video and audio from the mobile phone through the projector. This only applies to products with a HDMI input that supports MHL. For MHL support, check the HDMI IN 2 (MHL) port. Use a dedicated cable for MHL. *  ptional Extras O NOTE When you connect a mobile phone to the HDMI IN 2 (MHL) port, you can see yy the mobile phone screen through a projector. [. . . ]