User manual LG 23090

[. . . ] · Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull the cord around sharp edges or corners. · Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. · Do not handle vacuum cleaner or plug with wet hands. [. . . ] · If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. SAVE THESE INSTRUcTIONS This vacuum cleaner is intended for household use only. FOR RESIDENTS OF THE UNITED KINGDOM ONLY If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket. safety information _3 Safety information SAFETY INFORMATION WARNING · Before operating the appliance, please read this manual thoroughly and retain it for your reference. · Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. WARNING CAUTION/WARNING SYMBOLS USED WARNING Indicates that a danger of death or serious injury exists. Indicates that a risk of personal injury or material damage exists. CAUTION CAUTION When using the hose attachment, please ensure that vacuum remains flat and level on the floor surface to prevent contact from the brush roller with the floor surface. If the vacuum does not remain flat and level, this could result in damage to the flooring. CAUTION To reduce risk of injury and potential damage to floor surface, do not use the vacuum on a staircase. Always use vacuum from the bottom of the staircase and ensure that the vacuum remains securely flat on the floor surface. 4_ safety information Contents ASSEMBLING THE CLEANER 06. Mini Turbo Brush TROUBLESHOOTING 06 OPERATING THE CLEANER 08 10 14 contents _5 Assembling the cleaner pRODUcT VIEw Handle Bracket Brush (Select Models Only) Mini Turbo Brush (Select Models Only) *option *option Cord Clip Hose Clip Quick Release Cord Wrap Power Cord Power Switch Combination Dusting Brush/ Upholstery Tool Handle Release Pedal Stretch Hose Crevice Tool Extension Wand Carrying Handle Grille Cyclone Dust Bin Post-Motor Filter (Post-Motor Filter is located behind the door. ) Lower Cord Wrap Hose Wand Hose Wand Base Powerfoot Height Adjustment Knob CAUTION Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. To avoid danger of suffocation, keep away from babies and children. WARNING 6_ assembling the cleaner Assembling the cleaner ATTAcH HANDLE TO VAcUUM 1. Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body. Check to be sure the handle is fitted to the vacuum body. If there is a gap, continue to push firmly until the handle is flush. The cleaner can also be moved by using the Carrying Handle located on the top of the Dust Bin. Carrying Handle 8_ operating the cleaner Operating the cleaner SpEcIAL ON-bOARD TOOLS Your vacuum is not only a powerful carpet and rug cleaner, it's also a versatile above floor vacuum cleaner when you select one of the special tools. Grasp the end of the Hose Wand and lift Hose Wand to separate from the Hose Wand Base. Attach tools by firmly pushing onto Vacuum Hose Quick Release Cord Wrap or Extension Wand. Crevice Tool combination Dusting brush/Upholstery Tool: Power Cord Two Types of cleaning tools are included in one attachment: rotate for desired tool. Extension Wand · Use Brush side to dust furniture, blinds, books, lamps, shelves, and baseboards. Combination · Use Upholstery side for curtains, draperies, Dusting Brush/ cushions, fabrics. Upholstery Tool Hose crevice Tool: Wand Use in tight narrow spaces. 02 OpERATING THE cLEANER Extension wand: Use with desired attachment for a longer reach. Mini Turbo brush (Select Models): Hose Wand Base Use rotating brush action for small areas such as stairs and upholstery. *option Select Models Only Note: Press gently when using Mini Turbo Brush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating. pOwER cORD STORAGE 1. To use your vacuum, remove the cord and plug it into an electrical outlet. For your convenience, there is a quick release cord wrap for easy cord removal. When you are finished cleaning, turn vacuum cleaner off. [. . . ] When the filter becomes dirty, open the door, remove the filter and shake the dust off the filter. Note: The Post-Motor Filter is not washable, therefore do not wash it in the water. maintenance _11 Maintenance cHEcK ROTATING bRUSH AND DRIVE bELT You should check your vacuum cleaner's Rotating Floor Brush and Drive Belt regularly for wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any debris that has accumulated under the brush cover. [. . . ]