User manual LG 29FD1RLQ

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. bottom are provided for ventilation, and to insure Cleaning reliable operation of the television receiver, and to Unplug this television receiver from the wall outlet protect it from overheating. Do not use liquid cleaners or not be blocked or covered. never be blocked by placing the television receiver Do not use attachments not recommended by the on a bed, sofa, rug, or other similar surface. [. . . ] Press the G button to enter the Auto program mode. The AUTO PROGRAM starts now. Auto program. Memorizing the Channels by MANUAL PROGRAM Using the MEMORY/ERASE button You can conveniently perform MANUAL PROGRAM using the MEMORY / ERASE button on the remote control. Press the D / E or NUMBER buttons to select the channel number you want to memorize or erase. Press the MEMORY/ERASE button to select Memory or Erase. The on screen display appears as shown right. Selecting the on screen language 1. Press the MENU button and then D / E button until the menu is displayed as shown right. Press the G and then D / E button to select 3. Press the G and then use D / E button to select the desired language. From this point on, the on-screen display will be presented in the language of your choice. Press the MENU button to exit. Language. Memorizing Channels This is the function to memorize all the active channels in your area before you can use the TV. There are two ways of memorizing channels. Press the APC button to select Clear, Optimum, Soft or User. Press the ENTER(A) button to exit. XD (some models) XD is LG Electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. Note : When selecting APC options (Clear, Optimum and Soft), XD is automatically change to On. Adjusting the Picture This is the function to manually adjust the desired picture levels (Contrast, Brightness, Color, Sound control Enjoying the Stereo/SAP Broadcast This TV set can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program, as the system to be transmitted one additional sound signal as well as the original one. MTS function doesn't operate in the video mode. Press the MENU button and then use D / E button to select the Sound menu. Press the G and then D / E button to select 3. Press the G and then F / G button to adjust the balance level. Press the MENU button to exit. Balance. Using the MTS Button 1. Press the MTS button to select your desired MTS mode. Each time you press this button, the MONO, STEREO or SAP mode appears in turn. Notes: · Stereo or SAP can only be received if the TV station transmits those signals, even though you have selected STEREO or SAP. [. . . ] Push the end of 300 ohm to 75 ohm adapter into 75 ohm antenna jack. Connect the 75 ohm coaxial cable directly to the 75 ohm antenna jack. Connecting AUDIO/VIDEO IN Jacks 1. Connect the audio/video output jacks of the VCR to IN 1 or IN 2(A/V) jacks on the side or back of TV. If you connect the audio jack only, you can't hear the sound from the TV. [. . . ]