User manual LG 29FS4RLX

[. . . ] In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Service Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer. Press the POWER button on the front panel or side panel to turn off the TV when the TV set is not being used for a long time. It is recommended to remove the plug from the wall outlet(Power point). Aerial Connect the aerial cable to the socket on the back cover. For the best reception an outdoor aerial should be used. Disconnecting device from mains Mains plug is the disconnecting device. The plug must remain readily operable Location Position your set so that no bright light or sunlight falls directly onto the screen. [. . . ] All the on screen displays will appear in the selected language. Press the OK or F button to select the Special menu. Repeatedly press the MENU button to return to normal TV viewing. * Tilt (option) The TV picture may tilt to the left or right if the TV set moves to another position. This function can be used to compensate the tilt. Degaussing (option) Due to the super large Tube in the set. The colour purity of the picture may be affected by other magnetic influences such as speakers. Stripes may appear on the screen or there may be colour patches. Note : If you cannot adjust the screen condition by degaussing, try it again after about 4 minutes. TV and AV modes AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the `Connection of external equipment' section. AV1 : VCR connected to the Euro scart socket or AV IN 1 sockets on the set AV2 : VCR connected to the AV IN 2 sockets on the set. AV3 : VCR connected to the AV IN3 sockets of the set. COMPONENT : DVD Player connected to the COMPONENT sockets on the set (option) Alternatively you can select the TV or AV mode by pressing the TV/AV button. Also you can assign a station name with five characters to each programme number. Booster (option) If the reception is poor at the fringe area of the TV signal, select Booster to On. will not display. Fine tuning Normally fine tuning is only necessary if reception is poor. The finely tuned programme will be indi cated by yellow number during programme selection. Programme edit ()O}{OOKOMENU ()O}{OOKOMENU Station menu Picture PSM XD Contrast Brightness Colour Sharpness { { { { { { or BG I DK M ()O}{OOKOMENU Picture menu Sound SSM TurbooSound AVL Balance X-WAVE { { { { { Programme edit O0OOCO03 0OOARO1DOOO5OOSO69 O1OOCO03OOO6OOSO17 O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 O4OOSO67OOO9OOCO11 DeleteOOOOCopy MoveOOOOOOSkip ()O}{OOKOMENU ()}{OOKOMENU Time Sound menu { { { { Clock Offotime Onotime Autoosleep ()O}{OOKOMENU Time menu Special Language Input Childolock Degauss { { { { Deleting a programme 1. Select a programme to be deleted with the D / E or F / G button. The selected programme is deleted, and all the following programmes are shifted up one position. Select a programme to be copied with the D / E or F / G button. All the following programmes are shifted down one position. Select a programme to be moved with the D / E or F / G button. Move the programme to the desired programme number with the D / E or F / G button. Press the YELLOW button again to release this function. Select a programme number to be skipped with the D / E or F / G button. Press the BLUE button again to release the skipped programme. [. . . ] UPDATE Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then the display will change to the page number. Press this button to view the updated teletext page. [. . . ]