User manual LG 32LG5300

[. . . ] LCD TV OWNER'S MANUAL LCD TV MODELS 32LG53 37LG53 42LG53 Please read this manual carefully before operating your TV. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service. PREPARATION Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Front Panel Controls - - - - - - - - - - - - - - - - - - - - - - - - 4 Back Panel Information - - - - - - - - - - - - - - - - - - - - - - - 5 Stand Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Please set it up carefully so the product does not fall over. [. . . ] Select Installation using the / button and press the OK or > button. Select Installation (DTV-C) using the / button and press the OK or > button. Select Linear Search using the / button and press the OK or > button. CHANNEL SETUP GB-38 Select Start/End Frequency using the / button and press the OK or > button. Enter the frequency using the NUMBER buttons. Linear Search Start Frequency End Frequency Step Network Search Append Symbol Rate 114000 858000 Auto Disable Auto Search Select Step using the / button and press the OK or > button. Select an option among Auto, 250, 1000, 7000 and 8000 using the / button and press the OK button. If you do not know the value, please select Auto. If the required value does not exist, select User Define and enter the value directly. Enter the value Select Network Search using the / button and press the OK or > button. Select an option among Disable, Enable and User Define using the / button and press the OK button. When you select User Define to set the network manually, enter network value using the NUMBER buttons. Select Append Symbol Rate using the / button and press the OK or > button. Select the symbol rate using the / button and press the OK button. It will be displayed symbol rates that you selected. The TV will search channels by all of symbol rates that you selected. Select Search using the / button and press the OK button to start the linear search. The next procedures are similar to those for the automatic search. Please refer to Automatic Search (p. 36). Manual Search (In Digital TV Mode Only) You can search channels manually by searching parameters, using the MUX information. Press the DTV SETUP button. Select Installation using the / button and press the OK or > button. Select Installation (DTV-T) using the / button and press the OK or > button. Select Manual Search using the / button and press the OK or > button. Select Channel using the / button and press the OK or > button. Select one of channels using the / button and press the OK button. When entering channel value, the appropriate frequency value is displayed. Manual Search Channel Frequency Network Search 25 506000 Disable Search Strength (100%) Select Frequency using the / button and press the OK or > button. Enter the frequency using the NUMBER buttons and press the OK button. When entering frequency, the appropriate channel for the entered frequency is automatically displayed on channel. search will activate. Quality (100%) Select or set the option CHANNEL SETUP Select Network Search using the / button and press the OK or > button to Select Search using the / button and press the OK button. Channel GB-39 Manual Search (In Digital TV-C Mode Only) If your TV is connected to the cable and TV, you can search channels manually by searching parameters, if you know the MUX information. Press the DTV SETUP button. [. . . ] - This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes. - Allow a sufficient distance between the TV and the VCR. - Are the video cables installed properly? [. . . ]