User manual LG 32LM620S

[. . . ] Stock (Paper) Cover : Coated paper , S/W 150 g/ Inside : Uncoated paper , 60 g/ 4. ) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. [. . . ] INPUT /i 1 2 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. B type buttons are touch sensitive and can be operated through simple touch with your finger. NOTE y You can set the power indicator light to on or off by selecting OpTiON in the main menus. ASSEMBLING AND PREPARING 17 Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Y When transporting a large TV, there should be at least 2 people. Y When transporting the TV by hand, hold the TV as shown in the following illustration. ENGLiSh ENG CAUTiON y Avoid touching the screen at all times, as this may result in damage to the screen. Y It is recommended to move the TV in the box or packing material that the TV originally came in. Y Before moving or lifting the TV, disconnect the power cord and all cables. Y When holding the TV, the screen should face away from you to avoid damage. Y When transporting the TV, do not expose the TV to jolts or excessive vibration. Y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Y Whenever you handle TV, Protection pad should be covered with side of TV. (Depending on model) Protection Pad y Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. 18 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. Securing the TV to a table Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. (Only 32/37/42LS57**, 32/42/47LM669*) ENGLiSh ENG 10 cm 10 cm m 10 c 10 cm (Only 32/37LM62**, 32LM64**, 32LM660*) 2 Connect the power cord to a wall outlet. CAUTiON y Do not place the TV near or on sources of heat, as this may result in fire or other damage. m4 x 8 2EA NOTE (Only 32/37LM62** , 32LM64** , 32LM660*) How to fix the TV to a table 1. [. . . ] Connect the external device and the TV set with the euro scart cable as shown. To display images by using progressive scan, make sure to use the euro scart cable. Y When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART cable. (Only 3D models) y If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed. [. . . ]